With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium.Diameter Ø 36 mmHeight 506 mmPerformance at 50 Hz 300 WattMax. temperature 34°CSea water YesMin. temperature 18°CFreshwater YesPacking dimensions (Width) 6.5 cmPacking dimensions (Height) 58.5 cmPacking dimensions (Depth) 5 cmFor aquariums up to approx. 1000 LiterFor aquariums of about. 600 LitersObvious ideas often are the best ones. For example, the aquarium heat-er as a rod. The heating rod is simply hung in the water and heats it. It is true that the principle is still the same as decades ago. But a lot has changed in the meantime. And today the EHEIM adjustable heater is an ultra-modern electronic thermal device with the best available tech-nology. A jacket made from special laboratory glass increases the heating surface, serves as a heat shield and ensures optimum even heat emission. And no matter if you want to heat a 20 or a 1000 litre aquarium – you have 9 sizes to choose from.Benefits of the EHEIM thermostatic heatersPrecise temperature adjustment from 18 up to 34 °CSimple and safe recalibration (±2 °C)Temperature control accuracy ± 0,5 °CHeat kept at a constant levelHeating function is indicated by a control lampCompletely submersible (watertight)With automatic dry run shut-off (Thermo Safety Control)A glass jacket increases the heating surface and ensures optimum even heat emissionHandy cable length ca. 170 cmIncluding double suction cup holder9 sizes for aquariums from 20 up to 1000 litresSuitable for fresh and marine waterPrecision, ease of use, quality and safety “Made in Germany”The EHEIM aquarium heater is a further development of the legendary heating rod.The temperature can be precisely set from 18 to 34 °C and if required recalibrated (±2°). The temperature control accuracy is ± 0,5 °C.The heat is kept at a constant level. The heating function is indicated by a control lampThe rod is absolutely watertight, can be fully submersed, has an automatic dry run shut-off (Thermo Safety Control) and is suitable for fresh and salt marine water. One of the most important innovations is the glass jacket:- It increases the heating surface,- condenses the heat, ensures optimum even heat emission and- forms a heat shield (touching it doesn’t harm the livestock).The jacket is made from special laboratory glass, which was developed for research purposes. Therefore it is free from pollutants that could be released into the water. It is resistant to chemical and biological substances. It doesn’t have any fissures and hair cracks through which conden-sation could penetrate. And even extreme fluctuations of temperature that can occur during a water change do not harm this glass

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium.Diameter Ø 36 mmHeight 452 mmPerformance at 50 Hz 250 WattMax. temperature 34°CSea water YesMin. temperature 18°CFreshwater YesPacking dimensions (Width) 6.5 cmPacking dimensions (Height) 58.5 cmPacking dimensions (Depth) 5 cmFor aquariums up to approx. 600 LiterFor aquariums of about. 400 LitersObvious ideas often are the best ones. For example, the aquarium heat-er as a rod. The heating rod is simply hung in the water and heats it. It is true that the principle is still the same as decades ago. But a lot has changed in the meantime. And today the EHEIM adjustable heater is an ultra-modern electronic thermal device with the best available tech-nology. A jacket made from special laboratory glass increases the heating surface, serves as a heat shield and ensures optimum even heat emission. And no matter if you want to heat a 20 or a 1000 litre aquarium – you have 9 sizes to choose from.Benefits of the EHEIM thermostatic heatersPrecise temperature adjustment from 18 up to 34 °CSimple and safe recalibration (±2 °C)Temperature control accuracy ± 0,5 °CHeat kept at a constant levelHeating function is indicated by a control lampCompletely submersible (watertight)With automatic dry run shut-off (Thermo Safety Control)A glass jacket increases the heating surface and ensures optimum even heat emissionHandy cable length ca. 170 cmIncluding double suction cup holder9 sizes for aquariums from 20 up to 1000 litresSuitable for fresh and marine waterPrecision, ease of use, quality and safety “Made in Germany”The EHEIM aquarium heater is a further development of the legendary heating rod.The temperature can be precisely set from 18 to 34 °C and if required recalibrated (±2°). The temperature control accuracy is ± 0,5 °C.The heat is kept at a constant level. The heating function is indicated by a control lampThe rod is absolutely watertight, can be fully submersed, has an automatic dry run shut-off (Thermo Safety Control) and is suitable for fresh and salt marine water. One of the most important innovations is the glass jacket:- It increases the heating surface,- condenses the heat, ensures optimum even heat emission and- forms a heat shield (touching it doesn’t harm the livestock).The jacket is made from special laboratory glass, which was developed for research purposes. Therefore it is free from pollutants that could be released into the water. It is resistant to chemical and biological substances. It doesn’t have any fissures and hair cracks through which conden-sation could penetrate. And even extreme fluctuations of temperature that can occur during a water change do not harm this glass

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium.Diameter Ø36 mmHeight 243 mmPerformance at 50 Hz 50 WattMax. temperature 34°CSea water YesMin. temperature 18°CFreshwater YesPacking dimensions (Width) 6.5 cmPacking dimensions (Height) 34.5 cmPacking dimensions (Depth) 5 cmFor aquariums up to approx. 60 LiterFor aquariums of about. 25 LitersObvious ideas often are the best ones. For example, the aquarium heat-er as a rod. The heating rod is simply hung in the water and heats it. It is true that the principle is still the same as decades ago. But a lot has changed in the meantime. And today the EHEIM adjustable heater is an ultra-modern electronic thermal device with the best available tech-nology. A jacket made from special laboratory glass increases the heating surface, serves as a heat shield and ensures optimum even heat emission. And no matter if you want to heat a 20 or a 1000 litre aquarium – you have 9 sizes to choose from.Benefits of the EHEIM thermostatic heatersPrecise temperature adjustment from 18 up to 34 °CSimple and safe recalibration (±2 °C)Temperature control accuracy ± 0,5 °CHeat kept at a constant levelHeating function is indicated by a control lampCompletely submersible (watertight)With automatic dry run shut-off (Thermo Safety Control)A glass jacket increases the heating surface and ensures optimum even heat emissionHandy cable length ca. 170 cmIncluding double suction cup holder9 sizes for aquariums from 20 up to 1000 litresSuitable for fresh and marine waterPrecision, ease of use, quality and safety “Made in Germany”The EHEIM aquarium heater is a further development of the legendary heating rod.The temperature can be precisely set from 18 to 34 °C and if required recalibrated (±2°). The temperature control accuracy is ± 0,5 °C.The heat is kept at a constant level. The heating function is indicated by a control lampThe rod is absolutely watertight, can be fully submersed, has an automatic dry run shut-off (Thermo Safety Control) and is suitable for fresh and salt marine water. One of the most important innovations is the glass jacket:- It increases the heating surface,- condenses the heat, ensures optimum even heat emission and- forms a heat shield (touching it doesn’t harm the livestock).The jacket is made from special laboratory glass, which was developed for research purposes. Therefore it is free from pollutants that could be released into the water. It is resistant to chemical and biological substances. It doesn’t have any fissures and hair cracks through which conden-sation could penetrate. And even extreme fluctuations of temperature that can occur during a water change do not harm this glass

With the EHEIM thermocontrol-e heating element your fish get the right temperature even more precisely - in every aquarium. The obvious ideas are often the best. This also applies to the aquarium heating element. It is simply hung in the water and heats it up. The principle is the same as it was decades ago. But in the meantime the EHEIM controller heater has become an ultra-modern thermal device. The temperature can be set precisely and is measured even more precisely and kept more constant by the electronics. The coating made of special laboratory glass increases the heating surface, serves as a heat shield and ensures even heat emission. And whether you want to heat a 20 or 1200 litres aquarium - you can choose from 10 sizes.Advantages of the EHEIM control heater thermocontrol-ePrecise temperature adjustment from 20 to 32 °CNo readjustment necessaryControl accuracy ± 0.5 °CThe heat is kept constantControl lamp indicates the heating function (red: heating up; green: temperature reached)Fully submersible (waterproof)With dry-running protection (Thermo Safety Control)Glass coating increases the heating surface and ensures optimum, even heat outputConvenient cable length approx. 170 cmIncluding double suction holder10 sizes for aquariums from 20 to 1200 litresSuitable for fresh and marine waterHighest safety and reliability - 3 years warranty Precision, comfort, quality and safety.As you know, fish from tropical and subtropical waters need a certain constant water temperature. Before the engineer Eugen Jäger invented the aquarium heater decades ago, there was no really satisfactory solution to produce the appropriate water temperature. They dealt with complicated and sometimes curious methods. Some put the aquarium in the sun or by the heater or stove.The EHEIM thermocontrol aquarium control heater is a further development of the legendary heating element and thermocontrol-e is the latest electronically controlled variant.The temperature can be precisely adjusted from 20 to 32 °C. The control accuracy is ± 0.5 °C.The heat is kept constant. A control lamp indicates the heating function.The heater is absolutely waterproof, can be fully immersed, has a dry run protection (Thermo Safety Control) and is suitable for fresh and marine water. One of the most important innovations is the glass coating: • It increases the heating surface,• compresses the heat, ensures optimum, uniform heat output and• forms a heat shield (the aquarium inhabitants do not mind touching it).The coating is made of special laboratory glass. This was created for research purposes. It is therefore free of pollutants that could be released into the water. Chemical and biological substances do not attack it. There are no cracks and hairline cracks through which condensation water could pass. It is impact resistant. And even extreme temperature fluctuations, such as those that may occur during water changes, do not affect this glass.Diameter Ø:36 mmHeight:496 mmPerformance at 50 Hz:400 WattMax. temperature:32Sea water:YesMin. temperature:20 Freshwater:YesPacking:6 Part (s)For aquariums up to approx.:1200 LiterFor aquariums of about.:1000 LitersManufacturer guarantee:3 Year(s)

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium.Diameter Ø 36 mmHeight 270 mmPerformance at 50 Hz 75 WattMax. temperature 34°CSea water YesMin. temperature 18°CFreshwater YesPacking dimensions (Width) 6.5 cmPacking dimensions (Height) 34.5 cmPacking dimensions (Depth) 5 cmFor aquariums up to approx. 100 LiterFor aquariums of about. 60 LitersObvious ideas often are the best ones. For example, the aquarium heat-er as a rod. The heating rod is simply hung in the water and heats it. It is true that the principle is still the same as decades ago. But a lot has changed in the meantime. And today the EHEIM adjustable heater is an ultra-modern electronic thermal device with the best available tech-nology. A jacket made from special laboratory glass increases the heating surface, serves as a heat shield and ensures optimum even heat emission. And no matter if you want to heat a 20 or a 1000 litre aquarium – you have 9 sizes to choose from.Benefits of the EHEIM thermostatic heatersPrecise temperature adjustment from 18 up to 34 °CSimple and safe recalibration (±2 °C)Temperature control accuracy ± 0,5 °CHeat kept at a constant levelHeating function is indicated by a control lampCompletely submersible (watertight)With automatic dry run shut-off (Thermo Safety Control)A glass jacket increases the heating surface and ensures optimum even heat emissionHandy cable length ca. 170 cmIncluding double suction cup holder9 sizes for aquariums from 20 up to 1000 litresSuitable for fresh and marine waterPrecision, ease of use, quality and safety “Made in Germany”The EHEIM aquarium heater is a further development of the legendary heating rod.The temperature can be precisely set from 18 to 34 °C and if required recalibrated (±2°). The temperature control accuracy is ± 0,5 °C.The heat is kept at a constant level. The heating function is indicated by a control lampThe rod is absolutely watertight, can be fully submersed, has an automatic dry run shut-off (Thermo Safety Control) and is suitable for fresh and salt marine water. One of the most important innovations is the glass jacket:- It increases the heating surface,- condenses the heat, ensures optimum even heat emission and- forms a heat shield (touching it doesn’t harm the livestock).The jacket is made from special laboratory glass, which was developed for research purposes. Therefore it is free from pollutants that could be released into the water. It is resistant to chemical and biological substances. It doesn’t have any fissures and hair cracks through which conden-sation could penetrate. And even extreme fluctuations of temperature that can occur during a water change do not harm this glass

The electronic control guarantees an extremely high temperature accuracy, the highly efficient heating element ensures an even heat distribution.With preset comfortable temperatureIt could not be simpler: With the EHEIM aquarium heater thermopreset the comfortable temperature for the aquarium inhabitants is preset. Your tank keeps constant 25 degrees celsius. This is also the optimal temperature for the keeping of the most common aquarium inhabitants. The electronic control guarantees an extremely high precision / temperature accuracy, the highly efficient heating element ensures an even heat distribution. The EHEIM thermopreset bar heater is different from the EHEIM thermocontrol due to the additional plastic protection which ensures high mechanical stability. As usual from EHEIM, both heaters are equipped with an LED light to control the heating function and a dry-running protection. The new heater is available in four different performance classes, which are indicated by the number in the product name: thermopreset50 (50W), thermopreset100 (100W), thermopreset150 (150W) and thermopreset200 (200W). Common to all variants is the slim design – with a diameter of only 2,8 cm and a length of 17 to 25 cm, the heater is hardly visible also in small basins.Advantages of the EHEIM thermopreset heaterHigh user-friendliness thanks to preset temperatureDue to short lengths also usable in small tankVery narrow and therefore less visible in the aquariumPlastic protection ensures high mechanical stability High temperature accuracy due to electronic controlEven heat distribution thanks to the highly efficient heating elementWith dry-running protectionA control lamp indicates the heating functionSecure fixing by means of the included suction cupsSuitable for freshwater and marine water3 years warrantyDiameter Ø:28.2 mmHeight:168.5 mmPerformance at 50 Hz:50 WattMax. temperature:25Sea water:YesFreshwater:YesPacking:1 Part (s)Packing dimensions (Width):8.1 cmPacking dimensions (Height):24.5 cmPacking dimensions (Depth):4.2 cmFor aquariums up to approx.:60 LiterFor aquariums of about.:25 LitersManufacturer guarantee:3 Year(s)

The electronic control guarantees an extremely high temperature accuracy, the highly efficient heating element ensures an even heat distribution.With preset comfortable temperatureIt could not be simpler: With the EHEIM aquarium heater thermopreset the comfortable temperature for the aquarium inhabitants is preset. Your tank keeps constant 25 degrees celsius. This is also the optimal temperature for the keeping of the most common aquarium inhabitants. The electronic control guarantees an extremely high precision / temperature accuracy, the highly efficient heating element ensures an even heat distribution. The EHEIM thermopreset bar heater is different from the EHEIM thermocontrol due to the additional plastic protection which ensures high mechanical stability. As usual from EHEIM, both heaters are equipped with an LED light to control the heating function and a dry-running protection. The new heater is available in four different performance classes, which are indicated by the number in the product name: thermopreset50 (50W), thermopreset100 (100W), thermopreset150 (150W) and thermopreset200 (200W). Common to all variants is the slim design – with a diameter of only 2,8 cm and a length of 17 to 25 cm, the heater is hardly visible also in small basins.Advantages of the EHEIM thermopreset heaterHigh user-friendliness thanks to preset temperatureDue to short lengths also usable in small tankVery narrow and therefore less visible in the aquariumPlastic protection ensures high mechanical stability High temperature accuracy due to electronic controlEven heat distribution thanks to the highly efficient heating elementWith dry-running protectionA control lamp indicates the heating functionSecure fixing by means of the included suction cupsSuitable for freshwater and marine water3 years warrantyDiameter Ø:28.2 mmHeight:253.5 mmPerformance at 50 Hz:200 WattMax. temperature:25Sea water:YesFreshwater:YesPacking:1 Part (s)Packing dimensions (Width):8.1 cmPacking dimensions (Height):32 cmPacking dimensions (Depth):4.2 cmFor aquariums up to approx.:400 LiterFor aquariums of about.:300 LitersManufacturer guarantee:3 Year(s)

With EHEIM thermocontrol+ e, we offer you the aquarium heater of the future. Intelligent and ingeniously designed.EHEIM thermocontrol+ e is our first adjustable heater with digital control via WLAN. You can set the precise temperature from 18 to 32 °C via smartphone, tablet or PC/MAC. The selected temperature is accurately measured electronically and kept constant. However, if the temperature deviates by ± 2 °C, you will be notified immediately by e-mail. Automatic synchronisation with filter activity or lighting is also possible, this means you can wirelessly connect to the EHEIM professionel 5e Filter or to the LEDcontrol+.The construction of the thermocontrol+ e conforms to that of our proven thermocontrol heaters. The combination of the special laboratory glass cover, the flawless finish, the high quality materials and the absolute reliability, provides the ultimate heater. The heaters have a 3-year guarantee and there are 4 sizes to choose from - whether you want to heat a 200 or 1000 litre aquarium.Advantages of EHEIM thermocontrol+ eElectronic aquarium heater with integrated WLAN function and digital control via smartphone, tablet or PC/MAC.Precise temperature setting from 18 to 32 °CControl accuracy ± 0,5 °CIndicator lights show heating function and operating statusNotification to stored e-mail address as soon as the temperature deviates by ± 2 °CSmart linking with other electronically controlled devices of the EHEIM.digital family Synchronisation: temperature water flow adjustment or for lowering the set temperature at night, etc.)If necessary, adjustment with external thermometer (expert mode)Waterproof (IPX8) - for optimum wifi signal reception, immerse the heater in water up to the markDry-run protection (Thermo Safety Control)Convenient cable length of approx. 170 cmDouble suction holder included4 sizes for aquariums from 200 up to 1000 litresSuitable for both fresh and marine waterHighest safety and reliability with a 3 year guarantee.The smart aquarium heater with integrated WLAN function and digital control via smartphone, tablet or PC/MAC.Adjustment and controlThe EHEIM thermocontrol+ e aquarium heater is the advanced development of the thermocontrol e heater. Unlike the latter, it is not set manually, but programmed and monitored wirelessly via WLAN and by smartphone, tablet or PC/MAC.It can be accurately set from 18 to 32 °C. If the set temperature ever deviates by +/-2 degrees, you will receive an e-mail notification, provided you have stored a corresponding address.Synchronisation with other devicesA special highlight is that the thermocontrol+ e can be synchronised with other devices in the Eheim Digital Family such as the EHEIM professionel 5e filter or the lighting control LEDcontrol+. You can therefore specify that the set temperature rises or falls when, for example, the filter flow (in bio mode) increases or decreases or the LED lighting is switched off or on.Example: The filter flow is increased at night and the lighting is switched off. The set temperature is automatically adjusted accordingly: 25 °C during the day; 23 °C at night. (Please note: Water is not cooled down - the heater has no integrated cooling).WLAN-connectionThe thermocontrol+ e is waterproof and fully submersible. For an optimal WLAN connection, however, the heater may only be immersed up to the "water level" mark.For the security of your device, every EHEIM thermocontrol+ e is encrypted ex works (password can be adjusted). After setting the desired temperature, the wifi network can be switched off.Diameter Ø:32 mm Height:486 mmPerformance at 50 Hz:300 WattMax. temperature:32Sea water:YesMin. temperature:18Freshwater:YesPacking:6 Part (s)WiFi:YesFor aquariums up to approx.:1000 LiterFor aquariums of about.:600 LiterManufacturer guarantee:3 Year(s)

The electronic control guarantees an extremely high temperature accuracy, the highly efficient heating element ensures an even heat distribution.With preset comfortable temperatureIt could not be simpler: With the EHEIM aquarium heater thermopreset the comfortable temperature for the aquarium inhabitants is preset. Your tank keeps constant 25 degrees celsius. This is also the optimal temperature for the keeping of the most common aquarium inhabitants. The electronic control guarantees an extremely high precision / temperature accuracy, the highly efficient heating element ensures an even heat distribution. The EHEIM thermopreset bar heater is different from the EHEIM thermocontrol due to the additional plastic protection which ensures high mechanical stability. As usual from EHEIM, both heaters are equipped with an LED light to control the heating function and a dry-running protection. The new heater is available in four different performance classes, which are indicated by the number in the product name: thermopreset50 (50W), thermopreset100 (100W), thermopreset150 (150W) and thermopreset200 (200W). Common to all variants is the slim design – with a diameter of only 2,8 cm and a length of 17 to 25 cm, the heater is hardly visible also in small basins.Advantages of the EHEIM thermopreset heaterHigh user-friendliness thanks to preset temperatureDue to short lengths also usable in small tankVery narrow and therefore less visible in the aquariumPlastic protection ensures high mechanical stability High temperature accuracy due to electronic controlEven heat distribution thanks to the highly efficient heating elementWith dry-running protectionA control lamp indicates the heating functionSecure fixing by means of the included suction cupsSuitable for freshwater and marine water3 years warrantyDiameter Ø:28.2 mmHeight:223.5 mmPerformance at 50 Hz:150 WattMax. temperature:25Sea water:YesFreshwater:YesPacking:1 Part (s)Packing dimensions (Width):8.1 cmPacking dimensions (Height):32 cmPacking dimensions (Depth):4.2 cmFor aquariums up to approx.:300 LiterFor aquariums of about.:200 LitersManufacturer guarantee:3 Year(s)

Suction for thermocontrol, thermocontrol e, thermocontrol+ e

PLATINIUM HEATER - innovative glass heaters from AQUAEL equipped with an electronic thermostat. They have temperature control from 20 to 33°C with an accuracy of +/- 0.4°C. This makes it possible to treat many fish diseases with the heater, including so-called "fish pox". They are equipped with an intuitive control system (ONE TOUCH system), a ceramic heat sink and a built-in electronic thermometer. The fully electronic thermostat ensures that the heater has no mechanical contacts or other moving parts prone to wear. This means they can work reliably for many years and ensure optimal thermal conditions in the aquarium. The PLATINIUM HEATER line includes 8 models with outputs from 25 to 500W, which allow precise adaptation to the size of the aquarium. The PLATINIUM heaters are among the most technically advanced aquarium water heaters available on the market. Heating aquarium water has never been so intuitive and safe. Features: Fully electronic - no fault-prone mechanical parts of the thermostat Built-in electronic thermometer - shows the current water temperature in the tank Electronic precision thermostat (+/- 0.4°C) The operation of the heating and the display of the current temperature are indicated by LEDs. Works in both freshwater and saltwater aquariums PLATINIUM heaters are manufactured according to the strictest European safety standards, which allows safe use and operation. Each unit is tested and calibrated in the AQUAEL laboratory, which guarantees accuracy and safety in use Product More Details  The correct aquarium water temperature is crucial for the health of fish and other aquatic organisms. This is one of the basic criteria that influences the success of breeding and the durability of the aquarium ecosystem. Water temperature has a significant impact on various aspects of fish life, including their metabolism, disease resistance and overall well-being. Market recognition The Platinium Heater is one of the many products that have been in the Aquael range for years and continually receive positive feedback from both customers and aquarium professionals. Such features of the heater as its lasting reliability and precision in action are what have determined its enduring popularity among aquarists. We are proud to supply products that meet the expectations of our customers and contribute to a healthy and harmonious fish life in the aquaria around the world. Precision in action The Platinium Heater maintains the aquarium water temperature with an accuracy of 0.4 degrees. It has a fully electronic thermostat – without parts prone to failure as in the case of mechanical thermostats – which guarantees reliability and failure-free operation. The Platinium Heater ensures even heat distribution throughout the aquarium. Thanks to the ceramic heat sink, the heat is distributed evenly, eliminating areas with different temperatures in the tank. This not only ensures optimal conditions for fish and other aquatic organisms, but also minimises the risk of the formation of areas of extreme temperature that can create stress or danger for the aquarium inhabitants. Easy to use The One Touch System ensures intuitiveness and simplicity of operation of the heater. It allows the operating temperature to be changed at the touch of a button. LEDs indicate both the current temperature in the tank and the target temperature programmed by the user. Problem-free installation is made possible by a set of rubber suction cups. Versatility The heater is designed for freshwater and marine tanks. With a wide operating range of 77 to 91 °F (25 to 33 °C), the Platinium Heater is also ideal for treating fish diseases such as fish pox. It can easily be installed in any tank using the suction cups and the hanger included in the package. Occupational safety Platinium Heaters are manufactured in accordance with the most stringent European safety standards, ensuring safe operation and maintenance. Each device is tested and calibrated in the Aquael laboratory, what ensures precision and safety of work. 25W 50W 75W 100W 150W 200W 250W 300W 500W For aquariums up to (litres) 10-25 15 - 50 35-75 60-100 90-150 130-200 180-250 230-300 300-1000 Power (watts) 25th 50 75 100 150 200 250 300 500 Dimension depth (cm) 20.5 22.5 22.5 24.5 28.5 28.5 36 36 36 Temperature control Yes Yes Yes Yes Yes Yes Yes Yes Yes Accuracy (°C) 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Fully electronic Yes Yes Yes Yes Yes Yes Yes Yes Yes Thermometer function Yes Yes Yes Yes Yes Yes Yes Yes Yes  

PLATINIUM HEATER - innovative glass heaters from AQUAEL equipped with an electronic thermostat. They have temperature control from 20 to 33°C with an accuracy of +/- 0.4°C. This makes it possible to treat many fish diseases with the heater, including so-called "fish pox". They are equipped with an intuitive control system (ONE TOUCH system), a ceramic heat sink and a built-in electronic thermometer. The fully electronic thermostat ensures that the heater has no mechanical contacts or other moving parts prone to wear. This means they can work reliably for many years and ensure optimal thermal conditions in the aquarium. The PLATINIUM HEATER line includes 8 models with outputs from 25 to 500W, which allow precise adaptation to the size of the aquarium. The PLATINIUM heaters are among the most technically advanced aquarium water heaters available on the market. Heating aquarium water has never been so intuitive and safe. Features: Fully electronic - no fault-prone mechanical parts of the thermostat Built-in electronic thermometer - shows the current water temperature in the tank Electronic precision thermostat (+/- 0.4°C) The operation of the heating and the display of the current temperature are indicated by LEDs. Works in both freshwater and saltwater aquariums PLATINIUM heaters are manufactured according to the strictest European safety standards, which allows safe use and operation. Each unit is tested and calibrated in the AQUAEL laboratory, which guarantees accuracy and safety in use. Product More Details  The correct aquarium water temperature is crucial for the health of fish and other aquatic organisms. This is one of the basic criteria that influences the success of breeding and the durability of the aquarium ecosystem. Water temperature has a significant impact on various aspects of fish life, including their metabolism, disease resistance and overall well-being. Market recognition The Platinium Heater is one of the many products that have been in the Aquael range for years and continually receive positive feedback from both customers and aquarium professionals. Such features of the heater as its lasting reliability and precision in action are what have determined its enduring popularity among aquarists. We are proud to supply products that meet the expectations of our customers and contribute to a healthy and harmonious fish life in the aquaria around the world. Precision in action The Platinium Heater maintains the aquarium water temperature with an accuracy of 0.4 degrees. It has a fully electronic thermostat – without parts prone to failure as in the case of mechanical thermostats – which guarantees reliability and failure-free operation. The Platinium Heater ensures even heat distribution throughout the aquarium. Thanks to the ceramic heat sink, the heat is distributed evenly, eliminating areas with different temperatures in the tank. This not only ensures optimal conditions for fish and other aquatic organisms, but also minimises the risk of the formation of areas of extreme temperature that can create stress or danger for the aquarium inhabitants. Easy to use The One Touch System ensures intuitiveness and simplicity of operation of the heater. It allows the operating temperature to be changed at the touch of a button. LEDs indicate both the current temperature in the tank and the target temperature programmed by the user. Problem-free installation is made possible by a set of rubber suction cups. Versatility The heater is designed for freshwater and marine tanks. With a wide operating range of 77 to 91 °F (25 to 33 °C), the Platinium Heater is also ideal for treating fish diseases such as fish pox. It can easily be installed in any tank using the suction cups and the hanger included in the package. Occupational safety Platinium Heaters are manufactured in accordance with the most stringent European safety standards, ensuring safe operation and maintenance. Each device is tested and calibrated in the Aquael laboratory, what ensures precision and safety of work. 25W 50W 75W 100W 150W 200W 250W 300W 500W For aquariums up to (litres) 10-25 15 - 50 35-75 60-100 90-150 130-200 180-250 230-300 300-1000 Power (watts) 25th 50 75 100 150 200 250 300 500 Dimension depth (cm) 20.5 22.5 22.5 24.5 28.5 28.5 36 36 36 Temperature control Yes Yes Yes Yes Yes Yes Yes Yes Yes Accuracy (°C) 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Fully electronic Yes Yes Yes Yes Yes Yes Yes Yes Yes Thermometer function Yes Yes Yes Yes Yes Yes Yes Yes Yes  

PLATINIUM HEATER - innovative glass heaters from AQUAEL equipped with an electronic thermostat. They have temperature control from 20 to 33°C with an accuracy of +/- 0.4°C. This makes it possible to treat many fish diseases with the heater, including so-called "fish pox". They are equipped with an intuitive control system (ONE TOUCH system), a ceramic heat sink and a built-in electronic thermometer. The fully electronic thermostat ensures that the heater has no mechanical contacts or other moving parts prone to wear. This means they can work reliably for many years and ensure optimal thermal conditions in the aquarium. The PLATINIUM HEATER line includes 8 models with outputs from 25 to 500W, which allow precise adaptation to the size of the aquarium. The PLATINIUM heaters are among the most technically advanced aquarium water heaters available on the market. Heating aquarium water has never been so intuitive and safe. Features: Fully electronic - no fault-prone mechanical parts of the thermostat Built-in electronic thermometer - shows the current water temperature in the tank Electronic precision thermostat (+/- 0.4°C) The operation of the heating and the display of the current temperature are indicated by LEDs. Works in both freshwater and saltwater aquariums PLATINIUM heaters are manufactured according to the strictest European safety standards, which allows safe use and operation. Each unit is tested and calibrated in the AQUAEL laboratory, which guarantees accuracy and safety in use. Product More Details  The correct aquarium water temperature is crucial for the health of fish and other aquatic organisms. This is one of the basic criteria that influences the success of breeding and the durability of the aquarium ecosystem. Water temperature has a significant impact on various aspects of fish life, including their metabolism, disease resistance and overall well-being. Market recognition The Platinium Heater is one of the many products that have been in the Aquael range for years and continually receive positive feedback from both customers and aquarium professionals. Such features of the heater as its lasting reliability and precision in action are what have determined its enduring popularity among aquarists. We are proud to supply products that meet the expectations of our customers and contribute to a healthy and harmonious fish life in the aquaria around the world. Precision in action The Platinium Heater maintains the aquarium water temperature with an accuracy of 0.4 degrees. It has a fully electronic thermostat – without parts prone to failure as in the case of mechanical thermostats – which guarantees reliability and failure-free operation. The Platinium Heater ensures even heat distribution throughout the aquarium. Thanks to the ceramic heat sink, the heat is distributed evenly, eliminating areas with different temperatures in the tank. This not only ensures optimal conditions for fish and other aquatic organisms, but also minimises the risk of the formation of areas of extreme temperature that can create stress or danger for the aquarium inhabitants. Easy to use The One Touch System ensures intuitiveness and simplicity of operation of the heater. It allows the operating temperature to be changed at the touch of a button. LEDs indicate both the current temperature in the tank and the target temperature programmed by the user. Problem-free installation is made possible by a set of rubber suction cups. Versatility The heater is designed for freshwater and marine tanks. With a wide operating range of 77 to 91 °F (25 to 33 °C), the Platinium Heater is also ideal for treating fish diseases such as fish pox. It can easily be installed in any tank using the suction cups and the hanger included in the package. Occupational safety Platinium Heaters are manufactured in accordance with the most stringent European safety standards, ensuring safe operation and maintenance. Each device is tested and calibrated in the Aquael laboratory, what ensures precision and safety of work. 25W 50W 75W 100W 150W 200W 250W 300W 500W For aquariums up to (litres) 10-25 15 - 50 35-75 60-100 90-150 130-200 180-250 230-300 300-1000 Power (watts) 25th 50 75 100 150 200 250 300 500 Dimension depth (cm) 20.5 22.5 22.5 24.5 28.5 28.5 36 36 36 Temperature control Yes Yes Yes Yes Yes Yes Yes Yes Yes Accuracy (°C) 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Fully electronic Yes Yes Yes Yes Yes Yes Yes Yes Yes Thermometer function Yes Yes Yes Yes Yes Yes Yes Yes Yes  

PLATINIUM HEATER - innovative glass heaters from AQUAEL equipped with an electronic thermostat. They have temperature control from 20 to 33°C with an accuracy of +/- 0.4°C. This makes it possible to treat many fish diseases with the heater, including so-called "fish pox". They are equipped with an intuitive control system (ONE TOUCH system), a ceramic heat sink and a built-in electronic thermometer. The fully electronic thermostat ensures that the heater has no mechanical contacts or other moving parts prone to wear. This means they can work reliably for many years and ensure optimal thermal conditions in the aquarium. The PLATINIUM HEATER line includes 8 models with outputs from 25 to 500W, which allow precise adaptation to the size of the aquarium. The PLATINIUM heaters are among the most technically advanced aquarium water heaters available on the market. Heating aquarium water has never been so intuitive and safe. Features: Fully electronic - no fault-prone mechanical parts of the thermostat Built-in electronic thermometer - shows the current water temperature in the tank Electronic precision thermostat (+/- 0.4°C) The operation of the heating and the display of the current temperature are indicated by LEDs. Works in both freshwater and saltwater aquariums PLATINIUM heaters are manufactured according to the strictest European safety standards, which allows safe use and operation. Each unit is tested and calibrated in the AQUAEL laboratory, which guarantees accuracy and safety in use. Product More Details  The correct aquarium water temperature is crucial for the health of fish and other aquatic organisms. This is one of the basic criteria that influences the success of breeding and the durability of the aquarium ecosystem. Water temperature has a significant impact on various aspects of fish life, including their metabolism, disease resistance and overall well-being. Market recognition The Platinium Heater is one of the many products that have been in the Aquael range for years and continually receive positive feedback from both customers and aquarium professionals. Such features of the heater as its lasting reliability and precision in action are what have determined its enduring popularity among aquarists. We are proud to supply products that meet the expectations of our customers and contribute to a healthy and harmonious fish life in the aquaria around the world. Precision in action The Platinium Heater maintains the aquarium water temperature with an accuracy of 0.4 degrees. It has a fully electronic thermostat – without parts prone to failure as in the case of mechanical thermostats – which guarantees reliability and failure-free operation. The Platinium Heater ensures even heat distribution throughout the aquarium. Thanks to the ceramic heat sink, the heat is distributed evenly, eliminating areas with different temperatures in the tank. This not only ensures optimal conditions for fish and other aquatic organisms, but also minimises the risk of the formation of areas of extreme temperature that can create stress or danger for the aquarium inhabitants. Easy to use The One Touch System ensures intuitiveness and simplicity of operation of the heater. It allows the operating temperature to be changed at the touch of a button. LEDs indicate both the current temperature in the tank and the target temperature programmed by the user. Problem-free installation is made possible by a set of rubber suction cups. Versatility The heater is designed for freshwater and marine tanks. With a wide operating range of 77 to 91 °F (25 to 33 °C), the Platinium Heater is also ideal for treating fish diseases such as fish pox. It can easily be installed in any tank using the suction cups and the hanger included in the package. Occupational safety Platinium Heaters are manufactured in accordance with the most stringent European safety standards, ensuring safe operation and maintenance. Each device is tested and calibrated in the Aquael laboratory, what ensures precision and safety of work. 25W 50W 75W 100W 150W 200W 250W 300W 500W For aquariums up to (litres) 10-25 15 - 50 35-75 60-100 90-150 130-200 180-250 230-300 300-1000 Power (watts) 25th 50 75 100 150 200 250 300 500 Dimension depth (cm) 20.5 22.5 22.5 24.5 28.5 28.5 36 36 36 Temperature control Yes Yes Yes Yes Yes Yes Yes Yes Yes Accuracy (°C) 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Fully electronic Yes Yes Yes Yes Yes Yes Yes Yes Yes Thermometer function Yes Yes Yes Yes Yes Yes Yes Yes Yes  

PLATINIUM HEATER - innovative glass heaters from AQUAEL equipped with an electronic thermostat. They have temperature control from 20 to 33°C with an accuracy of +/- 0.4°C. This makes it possible to treat many fish diseases with the heater, including so-called "fish pox". They are equipped with an intuitive control system (ONE TOUCH system), a ceramic heat sink and a built-in electronic thermometer. The fully electronic thermostat ensures that the heater has no mechanical contacts or other moving parts prone to wear. This means they can work reliably for many years and ensure optimal thermal conditions in the aquarium. The PLATINIUM HEATER line includes 8 models with outputs from 25 to 500W, which allow precise adaptation to the size of the aquarium. The PLATINIUM heaters are among the most technically advanced aquarium water heaters available on the market. Heating aquarium water has never been so intuitive and safe. Features: Fully electronic - no fault-prone mechanical parts of the thermostat Built-in electronic thermometer - shows the current water temperature in the tank Electronic precision thermostat (+/- 0.4°C) The operation of the heating and the display of the current temperature are indicated by LEDs. Works in both freshwater and saltwater aquariums PLATINIUM heaters are manufactured according to the strictest European safety standards, which allows safe use and operation. Each unit is tested and calibrated in the AQUAEL laboratory, which guarantees accuracy and safety in use. Product More Details  The correct aquarium water temperature is crucial for the health of fish and other aquatic organisms. This is one of the basic criteria that influences the success of breeding and the durability of the aquarium ecosystem. Water temperature has a significant impact on various aspects of fish life, including their metabolism, disease resistance and overall well-being. Market recognition The Platinium Heater is one of the many products that have been in the Aquael range for years and continually receive positive feedback from both customers and aquarium professionals. Such features of the heater as its lasting reliability and precision in action are what have determined its enduring popularity among aquarists. We are proud to supply products that meet the expectations of our customers and contribute to a healthy and harmonious fish life in the aquaria around the world. Precision in action The Platinium Heater maintains the aquarium water temperature with an accuracy of 0.4 degrees. It has a fully electronic thermostat – without parts prone to failure as in the case of mechanical thermostats – which guarantees reliability and failure-free operation. The Platinium Heater ensures even heat distribution throughout the aquarium. Thanks to the ceramic heat sink, the heat is distributed evenly, eliminating areas with different temperatures in the tank. This not only ensures optimal conditions for fish and other aquatic organisms, but also minimises the risk of the formation of areas of extreme temperature that can create stress or danger for the aquarium inhabitants. Easy to use The One Touch System ensures intuitiveness and simplicity of operation of the heater. It allows the operating temperature to be changed at the touch of a button. LEDs indicate both the current temperature in the tank and the target temperature programmed by the user. Problem-free installation is made possible by a set of rubber suction cups. Versatility The heater is designed for freshwater and marine tanks. With a wide operating range of 77 to 91 °F (25 to 33 °C), the Platinium Heater is also ideal for treating fish diseases such as fish pox. It can easily be installed in any tank using the suction cups and the hanger included in the package. Occupational safety Platinium Heaters are manufactured in accordance with the most stringent European safety standards, ensuring safe operation and maintenance. Each device is tested and calibrated in the Aquael laboratory, what ensures precision and safety of work. 25W 50W 75W 100W 150W 200W 250W 300W 500W For aquariums up to (litres) 10-25 15 - 50 35-75 60-100 90-150 130-200 180-250 230-300 300-1000 Power (watts) 25th 50 75 100 150 200 250 300 500 Dimension depth (cm) 20.5 22.5 22.5 24.5 28.5 28.5 36 36 36 Temperature control Yes Yes Yes Yes Yes Yes Yes Yes Yes Accuracy (°C) 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Fully electronic Yes Yes Yes Yes Yes Yes Yes Yes Yes Thermometer function Yes Yes Yes Yes Yes Yes Yes Yes Yes  

Aquarium heater, which precisely adjusts the heating power to the desired temperature of the water in the aquarium. Made of plastic, shatterproof housing guarantees safety of use in aquariums with turtles and large fish. The heater is available in 6 models, suitable for different sizes of aquariums. Caring for the vulnerable inhabitants of your aquarium  UltraHeater was created to ensure the thermal well-being of the most demanding species of aquarium animals. It is equipped with an extremely sensitive, electronic thermostat operating with a precision of +/- 0.5 °F [+/-  0.25 °C]. As  soon as the water temperature in the aquarium drops by the mentioned 0.5 °F [0.25 °C], the heater automatically starts working and increases the temperature of the water to the programmed one. Importantly, thanks to the Smart Heating System, the process of heating water runs smoothly, without sudden temperature jumps and without exposing sensitive aquarium inhabitants to stress. UltraHeater has a wide temperature control from 68 °F to 91.4 °F [from 20 °C to 33 °C], which in addition to providing ideal breeding conditions, also allows   the treatment of many diseases of aquatic animals, such as  fish pox. Safety Each model meets strict European standards, thanks to which the heaters are 100% safe for both aquarium inhabitants and aquarists. An important element of the heater from the point of view of safety is the housing resistant to breakage and heating. Thanks to her, the device  will prove itself in breeding both sensitive armorers and rays, as  well as strong aquatic turtles. Ease ULTRA HEATER heaters are comfortable and easy to use, thanks to the One Touch System. To program the heater, just press the button and the LEDs will show us the current and programmed temperature. Version ULTRA HEATER 100W Art. nr. 120587 Aquarium Capacity 16 - 26 US gal / 60 - 100 L Power [W] 100 Dimensions [in/cm] H = 8.2 in / 20.8 cm Temperature Regulation [°F/°C] ✓ Accuracy [°F/°C] 0.5 / 0.25 Overheat Protection ✓ Fully Electronic ✓ Thermometer Function ✓ Unbreakable ✓ Product More Details  ersion ULTRA HEATER 25W ULTRA HEATER 50W ULTRA HEATER 75W ULTRA HEATER 100W ULTRA HEATER 200W ULTRA HEATER 150W Art. nr. 120583 120584 120585 120587 123546 120588 Aquarium Capacity 3 - 7 US gal / 10 - 25 L 4 - 13 US gal / 15 - 50 L 9 - 20 US gal / 35 - 75 L 16 - 26 US gal / 60 - 100 L 34 - 53 US gal / 130 - 200 L 24 - 40 US gal / 90 - 150 L Power [W] 25 50 75 100 200 150 Dimensions [in/cm] H = 6.4 in / 16.3 cm H = 6.4 in / 16.3 cm H = 8.2 in / 20.8 cm H = 8.2 in / 20.8 cm H = 10.8 in / 27.4 cm H = 10.8 in / 27.4 cm Temperature Regulation [°F/°C] ✓ ✓ ✓ ✓ ✓ ✓ Accuracy [°F/°C] 0.5 / 0.25 0.5 / 0.25 0.5 / 0.25 0.5 / 0.25 0.5 / 0.25 0.5 / 0.25 Overheat Protection ✓ ✓ ✓ ✓ ✓ ✓ Fully Electronic ✓ ✓ ✓ ✓ ✓ ✓ Thermometer Function ✓ ✓ ✓ ✓ ✓ ✓ Unbreakable ✓ ✓ ✓ ✓ ✓ ✓  

Our Flow Heater is the first one featuring a Smart Heating System (SHS) – a smart power adjustment technology. The microprocessor adjusts the heating power to maintain the desired temperature in the aquarium. This translates into the smooth operation of the heater – without temperature surges in the aquarium and, by the same token, without stressing its inhabitants. With the electronic thermostat, the LED display shows not only the programmed but also the current water temperature. Electronic temperature sensors protect the aquarium from overheating and automatically switch off the device in no flow conditions. As the device is located on the outlet hose of the external filter, heated water is evenly distributed in the tank. The heater is mounted outside of the aquarium, so it does not take up space inside the tank and gives more freedom in terms of the interior arrangement. The first intelligent flow heater Features a Smart Heating System – adjusts the heating power to the size of the tank and the ambient conditions to optimise energy consumption Features an electronic, high-precision thermostat offering a ± 0.9 °F [0.5 °C] accuracy within the range from 68 to 91 °F [20 to 33 °C] You can conveniently set the temperature with a single button – One Touch System The LED display shows the programmed and current temperature value 3 temperature sensors – 2 electronic, 1 thermal fuse The heater switches off automatically in no flow conditions For use on ⁵/₈ / ⁵⁵/₆₄ in diameter hoses in fresh water and marine aquariums Elements included: the heater, two stable mounting brackets and clamping nuts Made in Europe

Karis Aquarium Heater - Reliable Temperature Control for Your Aquarium Keep your aquatic environment perfectly regulated with the Karis Aquarium Heater, designed for efficiency and durability. Key Features: Automatic Temperature Regulation: Ensures a stable and optimal water temperature for your aquatic life. Fully Submersible Design: Safe for complete immersion, providing seamless integration into your tank. Shock-Resistant Glass: Built with high-quality materials for long-lasting performance and safety. LED Indicator Lamp: Clearly displays the heating status for easy monitoring. Versatile Compatibility: Suitable for both fresh and saltwater aquariums. Available Power Options: 50W 100W 200W 300W Why Choose Karis Aquarium Heater? Designed for both beginner and experienced aquarists, the Karis Aquarium Heater delivers dependable performance, ensuring your fish and plants thrive in a consistently warm environment. Choose the perfect wattage for your tank size and enjoy peace of mind with this reliable heating solution. Instructions for Use Placement: Submerge the heater horizontally or vertically in your aquarium, ensuring it is fully covered by water at all times. Location: Position the heater near a water flow area (e.g., filter outlet) for even heat distribution. Initial Setup: Allow the heater to acclimate to the water temperature for at least 15 minutes before plugging it in. Temperature Adjustment: Use the dial to set your desired temperature. The heater will automatically maintain it. Indicator Lamp: The LED will light up when the heater is active and turn off when the desired temperature is reached. Maintenance: Regularly check for debris on the heater and clean gently with a soft cloth if needed. Safety and Usage Advice Always unplug the heater before removing it from the tank or during maintenance. Ensure the heater is completely cool before handling. Do not use the heater if the glass is cracked or damaged. Monitor the water temperature with a reliable aquarium thermometer. Use only the appropriate wattage for your aquarium size to avoid overheating or underheating.

Our Flow Heater is the first one featuring a Smart Heating System (SHS) – a smart power adjustment technology. The microprocessor adjusts the heating power to maintain the desired temperature in the aquarium. This translates into the smooth operation of the heater – without temperature surges in the aquarium and, by the same token, without stressing its inhabitants. With the electronic thermostat, the LED display shows not only the programmed but also the current water temperature. Electronic temperature sensors protect the aquarium from overheating and automatically switch off the device in no flow conditions. As the device is located on the outlet hose of the external filter, heated water is evenly distributed in the tank. The heater is mounted outside of the aquarium, so it does not take up space inside the tank and gives more freedom in terms of the interior arrangement. The first intelligent flow heater Features a Smart Heating System – adjusts the heating power to the size of the tank and the ambient conditions to optimise energy consumption Features an electronic, high-precision thermostat offering a ± 0.9 °F [0.5 °C] accuracy within the range from 68 to 91 °F [20 to 33 °C] You can conveniently set the temperature with a single button – One Touch System The LED display shows the programmed and current temperature value 3 temperature sensors – 2 electronic, 1 thermal fuse The heater switches off automatically in no flow conditions For use on ⁵/₈ / ⁵⁵/₆₄ in diameter hoses in fresh water and marine aquariums Elements included: the heater, two stable mounting brackets and clamping nuts Made in Europe