DoPhin PS2012 Protein Skimmer Features: Compact and stylish design for effortless operation. Versatile: Effectively separates organic matter while filtering water. Removes harmful proteins and waste materials with exceptional efficiency. Enhances oxygen levels in the water, benefiting aquatic life. Innovative needle impeller creates fine, plentiful air bubbles to improve separation effectiveness. Specifically crafted for saltwater environments. Operation: Thoroughly clean the skimmer prior to use. Avoid using any chemical cleaners. Secure the skimmer onto the aquarium wall and adjust the screw to ensure it remains stable and balanced. Take off the impurity case cover, then fill the pump casing with water until it reaches 50mm above the water pump. Set the air-inlet controller to "CLOSE" and then plug in the power supply. Activate the water pump to fill the tube with water. Switch the air-inlet controller to "OPEN" to let air in, and the protein skimmer will start operating. Allow the skimmer to function for at least 24 hours during the initial break-in phase, during which a wet foam froth should form and need to be cleaned off. After the break-in period, the wet foam will reduce, producing a sludge-like foam that should be cleaned off periodically. Performance Data: Model: PS-2012 Voltage: 220-240V/50Hz Power: 6.6W Output: 500L/Hr

Compact and efficient protein skimmer designed for marine aquariums. Protein skimmers play a crucial role in the filtration of marine water aquariums by eliminating proteins continuously released into the water by microorganisms, invertebrates, and fish. These powerful and economical skimmers effectively remove particles and floating debris while also aerating the aquarium. The incredibly compact and space-efficient sera marin Protein Skimmer PS 130 is among the smallest skimmers available. It is perfect for nano aquariums with a capacity of up to 130 liters (34 US gal). Similar to the slightly larger sera marin Protein Skimmer PS 200, it features an energy-efficient dispergator pump that is integrated into the unit’s casing. This pump draws in air and mixes it with the aquarium water. Both models can be conveniently attached to the inside of the aquarium using a height-adjustable holder bracket, allowing for easy adjustment of air and water flow. The sera marin Protein Skimmer 400 HO is designed for aquariums with a volume of up to 400 liters (106 US gal.) and offers versatile usage options. It can function as a hang-on skimmer or be utilized in a filter located beneath the aquarium (sump). This makes it an excellent choice for aquarists transitioning from freshwater setups to marine aquariums. The larger sera marin Protein Skimmer 600 S, intended for aquarium cabinet filters (filter sumps), is user-friendly and suitable for aquariums with a capacity of up to 600 liters (159 US gal.).

Small and compact defoamer for marine aquariums The skimmer acts as the core of filtration in a marine aquarium. It effectively eliminates the proteins that microorganisms, invertebrates, and fish continuously release into the water. This robust yet cost-effective skimmer not only removes particles and floating debris but also aerates the aquarium. Suitable for marine (*and freshwater) aquariums, it efficiently regulates "removes" proteins, phosphates, and other compounds, promoting a significant reduction in algae growth and enhancing oxygen levels. The remarkably compact and space-efficient Sera marin Protein Skimmer PS 200 is among the smallest skimmers available, making it ideal for aquariums of up to 200 liters. The unit can be effortlessly mounted to the inner wall of the aquarium using a height-adjustable holder. Both air and water flow are easily adjustable. Sera marin Protein Skimmer PS 200 measures 33.5x15x15cm in size *Also utilized in freshwater aquarium breeding.

FEATURE User-friendly design with combined functionality and easy disassembly for thorough cleaning. Extra-large protein reaction chamber for optimal performance. Internal bubble deflector enhances efficiency. Multi-circle water level adjuster for precise control. DC frequency conversion technology ensures high efficiency and energy conservation. Pinwheel impeller generates a greater number of bubbles. Venturi tube designed for high airflow. Durable ceramic shaft and bushings provide resistance to corrosion and extend the product's lifespan.

FEATURE Dual-function design with easy disassembly for effortless cleaning. Extra-large protein reaction chamber. Internal bubbles deflector for optimal performance. Adjustable multi-circle water level for customization. DC frequency conversion technology that maximizes efficiency and saves energy. Pin wheel impeller generates an abundance of bubbles. Venturi tube designed for high air flow. Durable ceramic shaft and bushings ensure corrosion resistance and longevity.

FEATURE Integrated design allows for straightforward disassembly for cleaning. Extra-large protein reaction chamber. Internal bubbles deflector. Multi-circle water level adjuster. DC frequency conversion technology ensures high efficiency and energy savings. Pin wheel impeller generates more bubbles. Venturi tube designed for high air flow. Ceramic shaft and bushings provide corrosion resistance and extended lifespan.

FEATURE Integrated design for effortless disassembly and cleaning. Extra-large protein reaction chamber. Internal bubbles deflector. Adjustable multi-circle water level. DC frequency conversion technology for enhanced efficiency and energy savings. Pinwheel impeller creates more bubbles. Venturi tube designed for high airflow. Ceramic shaft and bushings offer corrosion resistance and longevity.

EHEIM skim350 – the micro-surface skimmer designed for smaller aquariums with a capacity of up to 350 liters. It's easy to use, quick to set up, and offers great flexibility. Ready for immediate use. Over time, a film develops on the surface of almost any aquarium, containing microorganisms, dust, oils, and food residues – known as the mold film. With the EHEIM skim350 surface skimmer, you can effectively remove this mold film, ensuring a crystal-clear water surface and enhanced oxygen levels. While the EHEIM skim350 is built for regular use, it can also be utilized for short-term applications. If you plan to switch it between different aquariums, make sure to prevent the transfer of algae spores or diseases between tanks. The skimmer captures bacteria and dirt particles, which are then collected in the filter sponge. This sponge can easily be removed and should be thoroughly cleaned after each use. Compact surface skimmer for aquariums up to 350 liters. Eliminates surface films and microorganisms from the water surface. Encourages effective gas exchange. Suitable for both long-term and temporary use. Quick installation – easily attaches to the glass pane with suction cups. Only consumes 5 Watts of power. Dimensions: Width: 40.5 cm | Height: 132 cm | Depth: 54 cm. Manufacturer's warranty: 3 years. Compatible with saltwater: Yes Compatible with freshwater: Yes

Dophin SK-200 Aquarium Surface Skimmer Effectively eliminates oil, protein films, and debris from the surface of your aquarium water. Compact design includes an integrated pump for easy installation. Enhances oxygen exchange within your tank for a healthier aquatic environment. Compatible with both freshwater and saltwater tanks. Model: SK-200 Flow Rate: 200L/H Power Consumption: 3w Voltage: AC 220v / 50hz Maximum Height: 33cm

Introducing the EHEIM skim marine 300, a skimmer that combines exceptional technology with top-notch user-friendliness. Despite its compact size, the EHEIM skim marine 300 performs at the level of much larger protein skimmers. This skimmer operates through a highly efficient needle wheel pump (impeller) and features an adjustable air intake that draws in air independently, effectively regulating the skim rate. The skimmer can be easily attached to your aquarium glass with the included magnetic holder. Designed for marine water aquariums up to 300 liters Skimming pump utilizing highly efficient needle wheel technology Independent air intake (Dispergator principle) Adjustable air intake Extremely quiet operation Low energy consumption High skim performance Simple installation with magnetic holder Fully disassemblable for easy cleaning With a compact design and premium quality, this skimmer comes with a 3-year warranty. Dimensions: Depth: 91 mm Height: 348 mm Width: 153 mm Suitable for: Outdoor use: No Freshwater: No Sea water: Yes Manufacturer guarantee: 3 Year(s) Packing: 1 Part(s) Packing dimensions: Depth: 11 cm Height: 39 cm Width: 18 cm

The EHEIM skimmarine 100 boasts remarkable features. It incorporates a new dual-chamber system that directs dirty water into one chamber while allowing clean water to flow through the other, returning to your aquarium. The clearly defined flow direction enhances its efficiency. Additionally, the high-quality lime wood diffuser ensures that the Nano operates quietly. Note that the Nano does not come with its own motor, and the EHEIM air100 is necessary for operation. Benefits of the EHEIM skimmarine 100 Nano: Designed for small marine aquariums up to approximately 100 liters Innovative 2-chamber system for improved efficiency High skimming performance Compact and space-saving design Secure installation with magnetic holder Completely disassembles for easy cleaning Operates extremely quietly thanks to the lime wood diffuser, which is simple to replace Preserves natural marine plankton Built with quality assurance, backed by a 3-year warranty Requires EHEIM air100 for operation Specifications: Depth: 45 mm Suitable for aquariums of approximately: 100 liters Outdoor use: No Freshwater: No Height: 250 mm Manufacturer's warranty: 3 years Packaging: 1 piece Packing dimensions (Depth): 5 cm Packing dimensions (Height): 32 cm Packing dimensions (Width): 17 cm Sea water: Yes Width: 75 mm

The EHEIM skimmarine 600 is a top-tier skimmer that integrates cutting-edge technology with optimal skimming control. Perfectly suited for larger marine aquariums, the EHEIM skimmarine 600 operates on the countercurrent principle, ensuring exceptional efficiency. Its specialized needle wheel pump generates an incredibly fine air-water mixture, resulting in a significant amount of foam or flotate. Additionally, the ceramic shaft guarantees smooth operation and an extended lifespan. For the best skimming performance, you can easily adjust the air intake, manage the water level in the reaction chamber, and modify its positioning within the filter sump. Benefits of the EHEIM skimmarine 600: Designed for marine aquariums up to roughly 600 liters Skimmer pump utilizing highly efficient needle wheel technology with a ceramic shaft Independent air intake based on the dispergator principle Quiet operation thanks to the adjustable water outlet Versatile 3-way control for optimal skimming: 1. Adjustable air intake at the silencer 2. Adjustable water level in the reaction chamber 3. Adjustable positioning (height) in the filter sump Compact design due to the internal skimmer pump Simple to disassemble for cleaning High quality backed by a 3-year warranty Dimensions: Depth: 190 mm Height: 525 mm Width: 190 mm Packing: 1 part Packing dimensions (Depth): 26.5 cm Packing dimensions (Height): 73.5 cm Packing dimensions (Width): 25.5 cm This skimmer is suitable for saltwater use and does not support freshwater aquariums. Enjoy the reliability of a 3-year manufacturer guarantee.

The Shark SKIMMER 300 is a state-of-the-art internal skimmer featuring a sleek and compact design, perfect for seamless integration into marine environments. Leveraging the latest advancements in reef technology, this skimmer is intended for aquariums up to 300 liters, depending on the bioload and specific biotope conditions. With its remarkably low energy usage, it stands out as one of the most efficient skimmers available for this level of performance. Additionally, it operates extremely quietly, is user-friendly, and can be easily disassembled for maintenance. Counter current skimming with an adjustable water intake. Compatible with ozone. Self-cleaning new impeller (Syncra Silent 1.0): Specifically designed for optimal skimming efficiency. Also offered for aquariums of 150 liters

The Shark SKIMMER 150 represents the latest in internal skimmer technology, boasting a sleek and compact design that seamlessly integrates into marine environments. This product is the result of cutting-edge advancements in reefing, specifically tailored for aquariums of up to 150 liters, depending on the biotope type and load. With its remarkably low energy usage, it stands out as one of the most efficient skimmers available for this level of performance. Not only is it extremely quiet, but it is also user-friendly and easy to disassemble. Instantaneous skimming through diffusion. Subtle design: unobtrusive with a simple, compact silhouette. Opaque casing: Shields internal components from light, helping to inhibit algae growth. Self-cleaning new impeller (Micra Plus): Specifically engineered for optimal skimming efficiency. Brush included for maintenance. Also available for aquariums up to 300 liters

Premium stainless steel Lily pipe equipped with a surface skimmer. This product is made up of two primary components: the inflow and outflow pipes. These pipes are designed to enhance water circulation in the lower regions of the aquarium, where stagnation can occur. The outflow pipe is engineered to produce a strong flow rate for more robust currents while maintaining the integrity of the aquarium's aquascape. It is also ideal for marine aquariums. Hose clips are included.