You can utilize the EHEIM climacontrol+ to lower the water temperature on warm days or raise it on cooler days, all according to the needs of your aquarium's inhabitants.The EHEIM climacontrol+ is our latest electronically controlled climate management device. You can effortlessly set the desired water temperature wirelessly using your smartphone, tablet, or PC/MAC. If the water becomes too warm, the unit will automatically cool it down, and if it gets too cold, it will warm it back up. This device takes care of everything for you.Additionally, it alerts you in advance if any issues arise; for instance, if the temperature exceeds or falls below the required level by 2 °C for over 5 minutes, you will receive a warning email.High temperatures outdoors can often lead to an increase in the aquarium water temperature during summer months. This can be extremely detrimental to fish and other aquatic life. For instance, if the temperature gets too high, corals can perish in marine aquariums, while oxygen depletion and rapid algae growth can occur in freshwater tanks.The EHEIM climacontrol+ is the perfect climate management solution for aquariums. It operates with low energy consumption and uses environmentally friendly coolant.There are three models available: S, M, and L, suitable for aquariums of up to 500, 1000, and 2000 liters, respectively, and they all come with a 3-year warranty.Features of the EHEIM climacontrol+Electronically controlled continuous flow climate control system with Wi-Fi capabilitiesTemperature adjustment and monitoring via Wi-Fi using a smartphone, tablet, or PC/MACCooling and heating functions availableConsistent regulation of water temperatureTemperature management for both freshwater and marine aquariumsAccurate temperature detection ranging from 5 °C to 35 °CAutomatically activates when temperatures go above or below a set targetWarning email notification if the temperature fluctuates by 2 °C for more than 5 minutesContinuously displays the current water temperature during operationUsable in ambient temperatures ranging from 10 °C to 38 °CHighly energy-efficient and eco-friendly climate control unit with ozone-friendly refrigerant (R290)Designed to operate exclusively with clean (filtered) water; for marine tanks, it should use water from the filter tank via a separate pump, or for freshwater tanks, it can be installed behind the external filter (alternatively, it can be used with a separate pump and pre-filter taken directly from the aquarium)Available in three models: S, M, and L for aquariums with capacities of up to 500, 1000, and 2000 litersConstructed from high-quality components and materials, backed by a 3-year warrantyImportant for marine aquariums:The ideal temperature for corals is between 24 and 26 °C; temperatures exceeding 29.5 °C can be lethal.Important for freshwater aquariums:The temperature should remain below 30 °C. Going above this level can lead to oxygen deficiency, hindered plant growth, and rapid algae growth.EHEIM climacontrol+ – the electronically controlled climate management device with WLAN functionality and numerous benefitsThe primary function of the EHEIM climacontrol+ is to cool the aquarium water when it becomes excessively warm. It offers both cooling and heating functionalities.During summer, elevated outdoor temperatures can frequently result in overheated aquarium water—especially in small rooms that warm up quickly, attics, or areas exposed to direct sunlight. Even enclosed tanks that trap heat from lighting may experience temperature spikes.The EHEIM climacontrol+ includes WLAN capabilities. The Wi-Fi controller allows you to set the optimal target temperature through your smartphone, tablet, or PC/MAC. Once the temperature goes above or below the set point, the device activates to cool or heat the water until the desired temperature is achieved. The current water temperature is always displayed, and if it deviates by 2 °C for over 5 minutes, a warning email will be sent to you.The EHEIM climacontrol+ is a continuous flow unit that should only be used with clean (filtered) water. For marine aquariums, this means using water from the filter tank with a separate pump. In freshwater setups, it can be positioned behind the external filter. (Alternatively, it can also be operated via a separate pump with a pre-filter directly from the aquarium.)The EHEIM climacontrol+ is designed to be energy-efficient and environmentally conscious. The refrigerant (R290) replaces harmful ozone-depleting substances, ensuring a minimal global warming potential (GWP).When installing the unit, ensure that the ventilation openings remain unobstructed. There should be at least a 50 mm gap from walls and other structures. In the base cabinet of an aquarium setup, appropriate cutouts must be made for fresh air intake and warm exhaust airflow (for more details, refer to the operating instructions).

You can utilize the EHEIM climacontrol+ to lower the water temperature on warm days or raise it on chilly days, meeting the needs of your aquarium's residents.The EHEIM climacontrol+ is our latest electronically managed climate control system. You can conveniently adjust the ideal water temperature wirelessly through your smartphone, tablet, or PC/MAC. If the water becomes too warm, the device automatically cools it down, and if it drops too low, it raises the temperature. The system takes care of monitoring and controlling everything for you.Additionally, it provides advanced notifications for any issues, such as when the desired temperature exceeds or falls below 2 °C for over 5 minutes, you will receive a warning email.High outdoor temperatures can frequently lead to overheating of aquarium water during the summer months. This situation is highly detrimental to fish and other aquatic life. For instance, excessive heat can cause corals to perish in marine tanks, while freshwater aquariums may experience rapid oxygen depletion and algae blooms.The EHEIM climacontrol+ is the ideal climate control solution for aquariums, featuring low energy consumption and operating with eco-friendly coolant.There are three models of climate control devices available: S, M, and L, designed for aquariums with capacities of up to 500, 1000, and 2000 liters, respectively, and each comes with a 3-year warranty.Key Features of the EHEIM climacontrol+Electronically controlled continuous flow climate control unit with Wi-Fi capabilityTemperature adjustment and monitoring via Wi-Fi on smartphone, tablet, or PC/MACCooling and heating functionsConsistent regulation of water temperatureTemperature management for both freshwater and marine aquariumsAccurate temperature detection ranging from 5 °C to 35 °CAutomatically activates above or below the designated target temperatureWarning email if the temperature goes over or under 2 °C for more than 5 minutesContinuously displays the current water temperature while in useOperates efficiently within an ambient temperature range of 10 °C to 38 °CHighly energy-efficient and environmentally friendly climate control unit with ozone-friendly refrigerant (R290)Should be used exclusively with clean (filtered) water; for marine aquariums, it connects via a separate pump with water from the filter tank, or for freshwater aquariums, it can be positioned behind the external filter (alternatively, it can also be used via a separate pump with pre-filter directly from the aquarium)Available in three sizes: S, M, and L for aquariums up to 500, 1000, and 2000 litersConstructed from high-quality materials and components, and includes a 3-year warrantyImportant information for marine aquariums:The ideal temperature for corals is between 24 and 26 °C; temperatures above 29.5 °C can be fatal.Important information for freshwater aquariums:The water temperature should always remain below 30 °C. Exceeding this limit may lead to oxygen deficiency, stunted plant growth, and excessive algae growth.EHEIM climacontrol+ – the electronically managed climate control system with WLAN functionality and numerous advantagesThe primary function of the EHEIM climacontrol+ is to cool the aquarium water when temperatures rise too high. It provides both cooling and heating capabilities.During the summer, elevated outside temperatures can often cause the aquarium water to overheat—especially in small rooms that heat up quickly, in attics, or in direct sunlight. Even in tanks that are covered at the top to retain warmth from the lighting, heat buildup can occur.The EHEIM climacontrol+ features WLAN functionality. The Wi-Fi controller allows you to set the ideal target temperature using your smartphone, tablet, or PC/MAC. When the temperature exceeds or falls below the target value, the unit activates to cool or heat the water until the desired temperature is achieved. The current water temperature is always displayed. If the set temperature fluctuates by 2 °C for more than 5 minutes, you will receive a warning email.The EHEIM climacontrol+ operates as a continuous flow device and should only be used with clean (filtered) water. For marine aquariums, this means using water from the filter tank with a separate pump. In freshwater aquariums, it can be placed behind the external filter, or alternatively, operated via a separate pump with a pre-filter directly from the aquarium.The EHEIM climacontrol+ is designed for energy efficiency and environmental responsibility. The refrigerant (R290) is a replacement for ozone-depleting substances, possessing minimal global warming potential (GWP).When positioning the unit, ensure that ventilation openings remain unobstructed. Maintain a minimum distance of 50 mm from walls and other surfaces. In the base cabinet of an aquarium setup, appropriate cutouts must be made to ensure adequate air supply and exhaust for warm air (refer to the user manual for more details).

Features Powered by an electromagnetic linear motor, ensuring high efficiency with a straightforward and effective design. Operates without oil lubrication, utilizing only pure compressed air. Incorporates CAD-assisted design principles for significant displacement and elevated output pressure. Utilizes SF3 composite bearings for reduced energy consumption, extended lifespan, and minimal noise levels.

Having adequate oxygen is crucial for the natural processes that sustain both fish and plants in your garden pond. The AIR pond aerator delivers the vital oxygen needed for your pond's ecosystem, while also enhancing filtration efficiency through improved water circulation. This extra oxygen helps break down harmful substances through bacterial action, fostering a healthier pond environment. Efficient, energy-saving, and long-lasting! Ultra quiet operation Energy efficient Optimal oxygen supply for aquatic life and plants Constructed with UV-resistant, durable casing and reliable pump technology Simple to use Proudly made in Germany Included in the package: Air pump with two outlets 2 aeration stones 2 aeration hoses, each 5 m long 2 two-in-one connector pieces for dual outlets 2 non-return valves Specifications: Maximum flow rate: 1000 l/h Maximum delivery height: 2.8 m Pressure: 280 mbar Dimensions (w x d x h): 176 x 118 x 103 mm Cable length: 3 m Power consumption: 8.5 W Manufacturer warranty: 3 Year(s) Power supply: 220-240 V / 50 Hz