Aqua Medic Nitrate Reductor Nr 1000

Nitratreductor NR 1000 Denitrification filter for aquariums up to 1000 litres (c. 250 gallons)   The Nitratreductor is an anaerobic biological reactor for removing nitrates from marine and freshwater aquaria. It has a 10 l (c. 4.5 gals) volume and an internal circulation pump. The Nitratereductor works with a flow rate of 1 to 4 l/hr (c. 0.25 to 1 gph). In the absence of oxygen this situation promotes bacteria that metabolize nitrate. Denimar powder or Deniballs are used as an organic energy source. The Nitratereductor is a closed unit that can be integrated into filter systems, but may also be installed to stand alone under the aquarium. To monitor this process, it is possible to use a redox potential controller (ORP controller) in conjunction with an electrode inserted in the inbuilt PG13.5 port or the SP 3000 Dosing Pump (supplied) can be connected for a fully controlled system. Dimensions excluding electrode (l x w x h): 17 x 17 x 54 cm (c. 7” x 7” x 22”)Accessories: Denimar powder and Deniballs to feed the anaerobic bacteriaAqua Medic mV Controller or Aqua Medic mV Computer c/w pressure resistant mV (Redox or ORP) probe with PG13.5 threaded connection. Denitrification filter suitable for aquariums up to 1000 litres (approximately 250 gallons)   The Nitratreductor serves as an anaerobic biological reactor designed to eliminate nitrates from both marine and freshwater aquariums. It features a volume of 10 l (around 4.5 gals) and comes equipped with an internal circulation pump. The Nitratereductor operates at a flow rate ranging from 1 to 4 l/hr (approximately 0.25 to 1 gph). In an oxygen-free environment, this setup fosters the growth of bacteria that consume nitrate. Organic energy sources such as Denimar powder or Deniballs are utilized. The Nitratereductor is a self-contained unit that can be incorporated into existing filter systems or can function independently beneath the aquarium. For process monitoring, a redox potential controller (ORP controller) may be used along with an electrode inserted into the built-in PG13.5 port, or the accompanying SP 3000 Dosing Pump can be connected for comprehensive system control. Dimensions without electrode (l x w x h): 17 x 17 x 54 cm (approximately 7” x 7” x 22”) Accessories: Denimar powder and Deniballs to nourish the anaerobic bacteria Aqua Medic mV Controller or Aqua Medic mV Computer including pressure-resistant mV (Redox or ORP) probe with PG13.5 threaded connection.