Flourish Iron is an exceptionally concentrated ferrous iron gluconate supplement, providing 10,000 mg/L of iron. This formulation enables plants to benefit more efficiently since the iron is already in its ferrous state, allowing them to save energy during absorption. KEY FEATURES: Highly concentrated iron source (10,000 mg/L) tailored for planted aquariums Contains ferrous gluconate iron Ferrous gluconate is more effective for foliar feeding compared to iron-EDTA DIRECTIONS: Administer 1 capful (5mL) for every 200L (50 US gallons) or adjust as needed to maintain approximately 0.10 mg/L of iron. For smaller measurements, each cap thread is roughly equivalent to 1mL.Expires on 20 Nov 2028

Equilibrium is expertly formulated to create the perfect mineral profile for your planted aquarium. This unique blend is free from sodium and chloride. It includes only calcium, magnesium, and potassium salts, which not only support fish metabolism but also significantly enhance plant growth. KEY FEATURES: Restores and sustains mineral balance and GH Free from sodium or chloride, unlike other products Perfect for use with RO or DI water or any water lacking essential minerals DIRECTIONS: To increase mineral content/general hardness (GH) by 1 meq/L (3 dH), add 16g (1 tablespoon) for every 80L (20 US gallons) when initializing your aquarium or during water changes (add to fresh water). For best results, we suggest mixing with 1L (1 qt.) of water (the mixture will appear slightly cloudy). When this solution is added to the aquarium, it may create a slight haze that should clear up within 15-30 minutes.Expires on 03 Feb 2029

Cupramine is highly effective in eliminating oodinium, cryptocaryon, amyloodinium, ichthyophthirius, and other ectoparasites that affect both freshwater and marine fish. It outperforms copper sulfate, chloride, and citrate: it is non-acidic, less harmful to fish, remains dissolved, and does not pollute the filter bed. Additionally, it surpasses chelates: it is fully charged (ionic), remains active at low concentrations, and can be removed with carbon. KEY FEATURES: Copper remedy for external parasites Effective at low concentration (does not precipitate) Bound to amine, making it less toxic to fish Completely removable with carbon or Cuprisorb DIRECTIONS: Before Treatment Eliminate all invertebrates - they are highly sensitive to copper and cannot withstand treatment with copper-based medications. Turn off UV filters, ozone filters, and remove chemical filtration such as MatrixCarbon and Purigen. Avoid using alongside any other medications. Do not utilize products containing reducing agents (conditioners, ammonia binders, etc.) while administering Cupramine. Treatment If your bottle is equipped with a dropper cap, administer 20 drops (1mL) per 40L (10.5 US gallons) on the first day, then wait 48 hours before repeating. For bottles without a dropper, each inner ring represents 1mL. In freshwater, use half the recommended dose. The final copper concentration should be 0.5 mg/L (0.25 mg/L in freshwater). Maintain this concentration for 14 days. Avoid redosing without testing first. If your tank has ever been treated with ionic copper (e.g., copper chloride, sulfate, or citrate), check the copper level following the initial dose. Although most fish can tolerate Cupramine up to 0.8 mg/L, it is not recommended to exceed 0.6 mg/L of copper. Complete the Full Treatment Ich, velvet, and several other parasites spend a significant part of their life cycle as cysts that can resist medication and hide within the substrate of your tank. It's crucial to complete the entire treatment even if parasites are not visible on the fish! After Treatment Cupramine can be eliminated using carbon. Ensure the copper-absorbing media remains in your tank for at least one week after the copper concentration has reached 0 to guarantee that all traces of the medication have been thoroughly removed.Expires on 03 Feb 2030

The Fungus Treat solution is expertly designed to effectively tackle prevalent fungal infections, including cotton-like mycelium, fin rot, tail rot, gill infections, Lchthyophthirius, and Lymphocytic diseases, which are often spread among fish or arise due to subpar water conditions. This product is safe for use in freshwater tanks, aquatic plant setups, and marine aquariums. However, it is NOT suitable for reef aquariums. To use, add 10ml for every 60L of aquarium water. Please note that the water may appear blue after application. Be sure to remove activated carbon and any chemical media before use. Repeat the treatment daily following a 10% water change until the issue is resolved.Expires on 30 Dec 2027

Equilibrium is expertly crafted to achieve the perfect mineral levels for your planted aquarium. This formula is free from sodium and chloride. It includes only calcium, magnesium, and potassium salts, which not only support fish metabolism but also significantly enhance plant growth. KEY FEATURES: Restores and sustains mineral balance and GH Free from sodium or chloride, unlike competing brands Perfect for use with RO or DI water or any water lacking minerals DIRECTIONS: To increase mineral content/general hardness (GH) by 1 meq/L (3 dH), mix 16g (1 tablespoon) for every 80L (20 US gallons) when setting up your aquarium or during water changes (add to fresh water). For best solubility, we suggest combining with 1L (1 qt.) of water (the resulting solution will appear white and opaque). When introduced to the aquarium, this mixture may create a slight haze that should dissipate within 15-30 minutes.Expires on 03 Feb 2029

Nutrient-rich foliar spray designed specifically for the emersed leaves of aquatic plants thriving on Wabi-Kusa Walls. This formula boosts leaf coloration and offers a degree of pest deterrence. Convenient spray application.

Discus Buffer is designed to create the perfect environment for discus fish, maintaining a low pH and low general hardness (GH). This formula effectively lowers and stabilizes pH levels while softening water by removing calcium and magnesium. KEY FEATURES: Adjusts pH levels to between 5.8 and 6.8 Creates an ideal habitat for discus fish DIRECTIONS: Add 1 level teaspoon (5g) for every 40-80L (10-20 US gallons) daily until the desired pH is achieved. After reaching the target pH, use it once a month or during water changes as needed to maintain the pH levels.Expires on 03 Feb 2030

Discus Trace offers a comprehensive selection of trace elements that are essential for maintaining optimal health and growth in fish. Unlike land animals, fish derive their nutrients from both their diet and their surrounding environment. These trace elements can become depleted due to usage, oxidation, and precipitation, making it crucial to replenish them regularly. Discus Trace includes only those elements that have been proven to be necessary for fish. KEY FEATURES: Trace elements supplement specifically for discus Includes only those elements that are scientifically validated as essential for fish DIRECTIONS: Administer 1 capful (5mL) for every 80L (20 US gallons) twice weekly.Expires on 03 Feb 2030

Discus Trace provides a comprehensive selection of trace elements that are essential for the health and growth of fish. Unlike land animals, fish acquire nutrients from both their diet and their surroundings. Since trace elements can be depleted through usage, oxidation, and precipitation, it's crucial to replenish them regularly. Discus Trace only includes elements that are scientifically proven to be necessary for fish. KEY FEATURES: Trace element supplement specifically for discus fish Includes only the elements that are scientifically validated as essential for fish DIRECTIONS: Add 1 capful (5mL) for every 80L (20 US gallons) two times a week.Expires on 20 Nov 2029

Cupramine is highly effective in eliminating oodinium, cryptocaryon, amyloodinium, ichthyophthirius, and various ectoparasites affecting both freshwater and marine fish. It outperforms copper sulfate, chloride, and citrate by being non-acidic, less harmful to fish, remaining in solution, and not contaminating the filter bed. Additionally, it surpasses chelates, as it is fully charged (ionic), remains effective at low concentrations, and can be removed using carbon. KEY FEATURES: Copper treatment for external parasites Effective at low concentration (does not precipitate) Bound on amine, making it less toxic to fish Completely removable with carbon or Cuprisorb DIRECTIONS: Before Treatment Remove all invertebrates, as they are very sensitive to copper and cannot withstand treatment with copper-based medications. Turn off UV filters, ozone filters, and remove any chemical filtration such as MatrixCarbon and Purigen. Avoid using this product in combination with any other medication. Do not apply any products containing reducing agents (conditioners, ammonia binders, etc.) while using Cupramine. Treatment If the bottle comes with a dropper cap, administer 20 drops (1mL) per 40L (10.5 US gallons) on the first day, then wait 48 hours before repeating. For bottles without dropper caps, each inner ring corresponds to 1mL. In freshwater, use half the dose. The final copper concentration should be 0.5 mg/L (0.25 mg/L in freshwater). Maintain this concentration for 14 days. Do not re-dose without conducting a test first. If the tank has previously been treated with ionic copper (e.g., copper chloride, sulfate, or citrate), check the copper levels after the initial dose. While most fish can tolerate Cupramine up to 0.8 mg/L, it is not recommended to exceed 0.6 mg/L of copper. Complete the Full Treatment Ich, velvet, and many other parasites exist in a cyst stage that is resistant to medication and hides in the substrate of your tank for a significant part of their life cycle. It’s crucial to complete the entire treatment even if you do not see any parasites on the fish! After Treatment Cupramine can be eliminated using carbon. Keep the copper-absorbing media in your tank for at least one week after the copper concentration has dropped to 0, to ensure that all traces of the medication are fully eliminated.Expires on 03 Feb 2030

Clarity serves as the premier solution for clarifying both freshwater and saltwater environments. It utilizes a cutting-edge polymeric flocculating agent that is safe for both reefs and plants. Clarity effectively eliminates all varieties of cloudiness. KEY FEATURES: Water clarifier suitable for marine and freshwater Eliminates all types of cloudiness Safe for reefs and plants DIRECTIONS: Administer 1 capful (5mL) for every 80L (20 US gallons). In some cases, you may notice an increase in cloudiness after adding Clarity, which is completely normal and indicates that Clarity is functioning effectively. You can expect rapid clarification within 1-2 hours. If dealing with chemical or particulate clouding, be sure to clean the filter floss or cartridge once the tank has cleared.Expires on 03 Feb 2030

Cichlid Trace provides a comprehensive selection of trace elements that are essential for the health and growth of your fish. Unlike land animals, fish gather nutrients from their food as well as their surroundings. These trace elements can be depleted through use, oxidation, and precipitation, making it vital to replenish them regularly. Cichlid Trace includes only the elements that have been proven necessary for fish. KEY FEATURES: Trace elements supplement designed specifically for cichlids Contains only the elements that have been shown to be essential for fish DIRECTIONS: Add 1 capful (5mL) for every 80L (20 US gallons) twice a week.Expires on 19 May 2030

Cichlid Lake Salt is a precisely formulated mixture of salts crafted to mimic the natural habitat of Rift Lake African Cichlids. This product contains all the vital elements your fish need, such as magnesium, calcium, sodium, and potassium, along with trace minerals like iron, aluminum, and iodide. KEY FEATURES: Mimics the natural habitat of African Cichlids Includes balanced levels of calcium, magnesium, sodium, and potassium Impacts hardness without altering alkalinity or pH DIRECTIONS: All measurements are for 40 L (10 US gallons). Tanganyika: Use 11 g (1.5 teaspoons) Malawi: Use 5.5 g (3/4 teaspoon) Victoria: Use 3.6 g (1/2 teaspoon) Dosages are calculated based on DI or RO water; if using different water sources, first determine hardness (GH) and then adjust accordingly. For your reference, the Tanganyika dosage increases dGH by 8.8 units, the Malawi dosage by 4.4 units, and the Victoria dosage by 3 units. We suggest the following GH ranges: Tanganyika: 3-5.5 meq/L (8-14 dGH) Malawi: 1.5-3 meq/L (4-8 dGH) Victoria: 1-2 meq/L (3-6 dGH) Expires on 03 Feb 2030

Betta Basics is formulated to create the perfect habitat for both your betta and aquatic plants. This product effectively eliminates chlorine, chloramine, and detoxifies ammonia, ensuring a safe environment. It also stabilizes the water to a pH level of 7.0, promoting a thriving ecosystem for both fish and plants. For the best health of your fish, pair it with NutriDiet Betta Pellet Food. FEATURES: Establishes an ideal setting for both bettas and plants Eliminates chlorine, chloramine and detoxifies ammonia Buffers water to a pH of 7.0 DIRECTIONS: Apply with each water change. For optimal results, use 2–3 times a week as well. Add 1 capful (5 mL) for every 1.25 L (1.25 quarts) of water. In bowls designated solely for bettas (without plants), use 1 capful for every 4 L (1 US gallon) during water changes.Expires on 19 May 2030

Balances pH levels to 6.5. Establishes the perfect habitat for Asian Arowanas. Softens the water. Boosts immunity. Expires on 20 Nov 2029

Betta Basics is specially formulated to create the best possible habitat for both betta fish and aquatic plants. This product effectively eliminates chlorine, chloramine, and detoxifies ammonia. It stabilizes the water's pH at 7.0, fostering a thriving environment for your fish and plants. For optimal fish wellness, pair it with NutriDiet Betta Pellet Food. FEATURES: Establishes the perfect habitat for bettas and plants Eliminates chlorine, chloramine, and detoxifies ammonia Balances pH to 7.0 DIRECTIONS: Apply with every water change. For the best outcomes, use 2–3 times weekly as well. Add 1 capful (5 mL) for each 1.25 L (1.25 quarts) of water. In bowls dedicated solely to bettas (without plants), use 1 capful for every 4 L (1 US gallon) during water changes.Expires on 19 May 2027

Reef Fusion 2 is formulated with a blend of carbonates and bicarbonates, delivering an alkalinity of 4400 meq/L. This product is crafted to restore and uphold alkalinity in your reef aquarium, supplying calcareous organisms with the vital carbonate they require for healthy growth. FEATURES: Delivers 100,000 mg/L of ionic calcium Restores and sustains alkalinity Highly concentrated two-part system; easy 1:1 ratio DIRECTIONS: Administer to your aquarium every 1-2 days. Shake well prior to use. Add 1 mL of Reef Fusion 1 for every 25 L (6.5 US gallons) of water. (For your reference, the cap can hold 5 mL.) Pour this into an area with strong water movement in the tank. After a few minutes, add Reef Fusion 2 in the same fashion, using 1 mL per 25 L (6.5 US gallons), ensuring to shake well first. It is recommended to distribute the two products in different spots within the tank. This dosage provides 4 mg/L of calcium and 0.176 meq/L of alkalinity. Do not mix Reef Fusion 1™ directly with Reef Fusion 2™. Keep calcium levels between 380-420 mg/L. Maintain alkalinity within the range of 3-6 meq/L. You may increase the size or frequency of your dosage if the current regimen does not adequately sustain calcium and alkalinity levels, but do not exceed 4 mL/25 L (6.5 US gallons) in one day. When used as directed, Reef Fusion 1™ and Reef Fusion 2™ will effectively maintain the essential levels of calcium and alkalinity required for thriving coral growth, while also providing biologically suitable levels of various elements and trace minerals.

Pond Stability will quickly and safely create a biofilter in new ponds, thus preventing fish mortality caused by incomplete biofilter cycling. Additionally, Pond Stability helps to prevent and minimize sludge accumulation. This product is specifically designed for ponds and features a synergistic mix of aerobic, anaerobic, and facultative bacteria that aid in breaking down waste organics, ammonia, nitrite, and nitrate. KEY FEATURES: Water stabilization system for ornamental ponds Quickly and safely establishes a bio-filter Decomposes waste organics, ammonia, nitrite, and nitrate DIRECTIONS: Shake well before applying. Turn off UV light. On the first day of introducing a new pond, use 50mL for every 400L (100 US gallons). For the following 7 days, apply 25mL for each 400L (100 US gallons) daily. Fish and other aquatic life can be added at any time as long as the dosage is maintained for the full 7 days. For optimal biofilter efficiency, use 5 capfuls for every 400L (100 US gallons) once a month, or with each water change, and whenever introducing new fish or when treating the pond.Expires on 10 Jul 2030

Balances pH to 6.5. Fosters the perfect habitat for Asian Arowanas. Conditions and softens water. Boosts immune system health. Expires on 30 Apr 2027

Reef Advantage Magnesium is a powerful (80,000 ppm) specially formulated mix of magnesium, chloride, and sulfate salts aimed at replenishing low magnesium levels while keeping the ionic ratios similar to those in natural seawater. This product is free from ammonia. KEY FEATURES: Highly concentrated, blended, and ionically balanced source of magnesium Absolutely NO Ammonia Crucial for preventing ionic imbalances DIRECTIONS: Beginner Administer 5g (1 level teaspoon) for every 80L (20 gallons) twice weekly. Mix in a minimum of 250mL (1 cup) of freshwater. For accurate measurements, utilize the Seachem Digital Spoon Scale. Advanced Measure the magnesium level, then continue the dosage regimen above until achieving a magnesium level of 1,200-1,350 mg/L. Each 5 g/80 L will increase magnesium by approximately 5 mg/L. You may adjust the amount or frequency, but do not surpass 25 g/80 L in a single day. After reaching target levels, use as needed to keep magnesium stable.Expires on 19 May 2030