Aqua Medic Calcium Reactor KR 1000 The Aqua Medic Calcium Reactor KR 1000 provides essential dissolved calcium for reef aquariums with a capacity of up to 250 gallons. This system is designed to be versatile and can function as a closed system. It can operate independently through a bypass system without being affected by the aquarium's water level, or alternatively, it can be installed within the crankcase. The KR 1000 features a port that allows for the integration of a PG threaded 13.5 electrode, which is used for measuring the pH level, along with a SP 3000 Dosing Pump to regulate the water flow. Key Features: Provides dissolved calcium for reef aquariums up to 250 liters A closed system designed for universal application Operable in a bypass mode, independent of aquarium water levels, or can be installed in the crankcase Includes a port for a PG 13.5 threaded electrode for pH measurement Equipped with an SP 3000 dosing pump to manage water flow

Aqua Medic Calcium Reactor KR Blue Our Aqua Medic Calcium Reactor KR Blue is a sealed unit featuring a built-in circulation pump and CO2 return system. It can be installed in a bypass, functioning independently of the aquarium or filter sump's water level. This reactor comes pre-filled with 8 lbs. of hydrocarbonate. By introducing CO2, the pH level within the KR Blue decreases, allowing the hydrocarbonate to dissolve effectively. Even though the flow rate is low at approximately 0.25 - 1 gph, it efficiently delivers substantial quantities of calcium and bicarbonate ions into the aquarium, greatly benefiting its inhabitants. The KR Blue includes a port for a pH probe (PG 13.5). It is suitable for aquariums ranging from 65 to 270 gallons. Recommended accessories: Dosing Pump SP 1500 for a steady water supply, Solenoid Valve, pH Controller, and pH Probe for CO2 supplementation, along with Hydrocarbonate and Dolomite for calcium and magnesium replenishment.

Robust circulation pump designed for aquariums, ideal for both saltwater and freshwater setups. The durable pump casing ensures longevity. It features an electronically controlled energy-efficient motor that operates with high efficiency. The polished ceramic shaft and bearing contribute to quiet operation and maintenance-free performance over the long term. This pump can be set up for both submerged and non-submerged use. A pre-filter basket and hose connections are included for your convenience. AVAILABLE: 6000, 9000, 12000 VOLTAGE: 230 V~/50 Hz

Helix Max UV sterilizers are designed to effectively eradicate single-celled algae, delivering sparkling clean water for both aquariums and ponds. The water flows in a spiral route around the quartz tube, which optimizes the usage of UV radiation compared to traditional models. The inlet and outlet connections can be rotated a full 360° for convenient installation from any angle. Each Helix Max unit comes equipped with a rubber cable and high-frequency electronic ballast, suitable for garden ponds, as well as both saltwater and freshwater aquariums. These electronic ballasts enhance the longevity and performance of the UV lamps. Product description: Water clarifier for fresh- and saltwater aquaria and garden ponds Helix Max UV sterilizers are effective at removing single-cell algae, providing crystal-clear water for aquariums and ponds. The water is channeled in a spiral path around the quartz tube, leading to improved efficiency of UV radiation compared to standard models. The inlet and outlet fittings can rotate 360° for easy installation at any angle. Each Helix Max unit is equipped with a rubber cable and high-frequency electronic ballast, making them ideal for garden ponds and both salt- and freshwater aquariums. The electronic ballasts extend the lifespan and effectiveness of the UV lamps. Type 5 Watt 9 Watt 11 Watt 18 Watt 36 Watt 55 Watt Saltwater aquarium capacity: 25 - 125 l 125 - 250 l 150 - 350 l 250 - 500 l 500 - 1,000 l up to 1,500 l Recommended max. flow: 100 l/h 200 l/h 300 l/h 500 l/h 1,000 l/h 1,500 l/h Freshwater aquarium capacity: 50 - 250 l 250 - 500 l 350 - 750 l 500 - 1,000 l 1,000 - 2,000 l up to 3,000 l Recommended max. flow: 200 l/h 500 l/h 700 l/h 1,000 l/h 2,000 l/h 3,000 l/h Capacity: 1.8 W/UVC 2.4 W/UVC 3.6 W/UVC 5.5 W/UVC 12 W/UVC 17 W/UVC Cable length: 2 m 2 m 2 m 10 m 10 m 10 m Lamp type: PL-S-5 W PL-S-9 W PL-S-11 W PL-S-18 W PL-S-36 W PL-S-55 W Max. pressure: 0.3 bar Power connection: 230 V~/50 Hz Dimensions (l x w in mm, approx.): 160 x 75 240 x 75 290 x 75 380 x 120 510 x 120 650 x 120

Helix Max UV sterilizers effectively eliminate single-celled algae, ensuring your aquariums and ponds maintain crystal clear water. The design directs water in a spiral around the quartz tube, maximizing the efficiency of UV radiation compared to conventional models. The inlet and outlet fittings offer 360° rotation, making installation at any angle a breeze. Each Helix Max unit features a durable rubber cable and a high-frequency electronic ballast, suitable for garden ponds as well as both saltwater and freshwater aquariums. These electronic ballasts not only enhance the lifespan of the UV lamps but also improve their performance. Product description: Water clarifier for freshwater and saltwater aquariums, as well as garden ponds. Helix Max UV sterilizers can effectively remove single-celled algae, providing crystal clear water in both aquariums and ponds. The water takes a spiral route around the quartz tube, which ensures a more effective utilization of UV radiation than typical units. The inlet and outlet fittings can be rotated 360° for convenient installation at any angle. All Helix Max models come with a rubber cable and a high-frequency electronic ballast, designed for garden ponds and both salt- and freshwater aquariums. The electronic ballasts help to prolong the lifespan and enhance the performance of the UV lamps. Type 5 Watt 9 Watt 11 Watt 18 Watt 36 Watt 55 Watt Saltwater aquarium 25 - 125 l 125 - 250 l 150 - 350 l 250 - 500 l 500 - 1,000 l up to 1,500 l Recommended max. flow 100 l/h 200 l/h 300 l/h 500 l/h 1,000 l/h 1,500 l/h Freshwater aquarium 50 - 250 l 250 - 500 l 350 - 750 l 500 - 1,000 l 1,000 - 2,000 l up to 3,000 l Recommended max. flow 200 l/h 500 l/h 700 l/h 1,000 l/h 2,000 l/h 3,000 l/h Capacity 1.8 W/UVC 2.4 W/UVC 3.6 W/UVC 5.5 W/UVC 12 W/UVC 17 W/UVC Cable length 2 m 2 m 2 m 10 m 10 m 10 m Lamp type PL-S-5 W PL-S-9 W PL-S-11 W PL-S-18 W PL-S-36 W PL-S-55 W Max. pressure 0.3 bar Power connection 230 V~/50 Hz Dimensions (l x w in mm, approx.) 160 x 75 240 x 75 290 x 75 380 x 120 510 x 120 650 x 120

Helix Max UV sterilizers effectively eliminate single-celled algae, providing crystal-clear water for both aquariums and ponds. The water spirals around the quartz tube, allowing for more efficient utilization of UV radiation compared to conventional units. The inlet and outlet fittings can rotate 360° for convenient installation at any angle. Each Helix Max comes equipped with a rubber cable and high-frequency electronic ballast, suitable for garden ponds as well as salt and freshwater aquariums. These electronic ballasts enhance the lifespan and efficiency of the UV lamps. Product description: Water clarifier for freshwater and saltwater aquariums and garden ponds Helix Max UV sterilizers effectively eliminate single-celled algae, ensuring crystal-clear water in aquariums and ponds. The water is routed in a spiral pattern around the quartz tube, which results in a more effective use of UV radiation than standard models. The inlet and outlet fittings can be rotated 360° for effortless installation at any angle. All Helix Max units are equipped with a rubber cable and high-frequency electronic ballast, making them ideal for garden ponds and both saltwater and freshwater aquariums. The electronic ballasts enhance the longevity and performance of the UV lamps. Type 5 Watt 9 Watt 11 Watt 18 Watt 36 Watt 55 Watt Saltwater aquarium 25 - 125 l 125 - 250 l 150 - 350 l 250 - 500 l 500 - 1,000 l up to 1,500 l Recommended max. flow 100 l/h 200 l/h 300 l/h 500 l/h 1,000 l/h 1,500 l/h Freshwater aquarium 50-250 l 250-500 l 350-750 l 500-1,000 l 1,000-2,000 l up to 3,000 l Recommended max. flow 200 l/h 500 l/h 700 l/h 1,000 l/h 2,000 l/h 3,000 l/h Capacity 1.8 W/UVC 2.4 W/UVC 3.6 W/UVC 5.5 W/UVC 12 W/UVC 17 W/UVC Cable length 2 m 2 m 2 m 10 m 10 m 10 m Lamp type PL-S-5 W PL-S-9 W PL-S-11 W PL-S-18 W PL-S-36 W PL-S-55 W Max. pressure 0.3 bar Power connection 230 V~/50 Hz Dimensions l x w in mm, approx. 160 x 75 240 x 75 290 x 75 380 x 120 510 x 120 650 x 120

Helix Max UV sterilizers are designed to effectively eliminate single-celled algae, providing crystal-clear water for both aquariums and ponds. The water is funneled in a spiral motion around the quartz tube, which enhances the efficiency of UV radiation compared to traditional units. The inlet and outlet fittings can be rotated 360° for convenient installation at any angle. Each Helix Max comes equipped with a rubber cable and high-frequency electronic ballast, suitable for garden ponds as well as salt and freshwater aquariums. These electronic ballasts not only prolong the lifespan but also enhance the performance of the UV lamps. Product description Water clarifier for fresh- and saltwater aquaria and garden ponds Helix Max UV sterilizers are capable of removing single-cell algae, ensuring crystal-clear water in aquaria and ponds. The water is routed in a spiral pattern around the quartz tube, leading to a more effective utilization of UV radiation than standard models. The inlet and outlet fittings can be rotated 360° for hassle-free installation at any desired angle. Each Helix Max unit includes a rubber cable and high-frequency electronic ballast, perfect for garden ponds and both salt- and freshwater aquaria. The electronic ballasts extend the lifespan and efficiency of the UV lamps. Type 5 Watt 9 Watt 11 Watt 18 Watt 36 Watt 55 Watt Saltwater aquarium 25 - 125 l 125 - 250 l 150 - 350 l 250 - 500 l 500 - 1,000 l up to 1,500 l Recommended max. flow 100 l/h 200 l/h 300 l/h 500 l/h 1,000 l/h 1,500 l/h Freshwater aquarium 50-250 l 250-500 l 350-750 l 500-1,000 l 1,000-2,000 l up to 3,000 l Recommended max. flow 200 l/h 500 l/h 700 l/h 1,000 l/h 2,000 l/h 3,000 l/h Capacity 1.8 W/UVC 2.4 W/UVC 3.6 W/UVC 5.5 W/UVC 12 W/UVC 17 W/UVC Cable length 2 m 2 m 2 m 10 m 10 m 10 m Lamp type PL-S-5 W PL-S-9 W PL-S-11 W PL-S-18 W PL-S-36 W PL-S-55 W Max. pressure 0.3 bar Power connection 230 V~/50 Hz Dimensions l x w in mm, approx. 160 x 75 240 x 75 290 x 75 380 x 120 510 x 120 650 x 120

The Aquamedic Kalkwasser Reactor is an innovative stirrer designed for ease of use. Kalkwasser provides a straightforward approach to enhancing calcium and alkalinity levels, and incorporating a kalkwasser reactor simplifies this process further. The Aquamedic Kalk Reactor is capable of functioning effectively with very low water flow, as its stirring mechanism does not rely on water pressure or a separate mixing pump. The electric motor ensures a consistent mixing of kalkwasser even with low flow top-off pumps. Footprint: 6.5" x 6.5" x 18.25" Media Chamber Dimensions: 4" x 15" Volume: 0.8 Gallons Hose Connections: 1/4" inlet x 1/2" outlet Media Capacity: 150 grams. The Aqua Medic Kalkwasser Stirrers come equipped with a bar that rotates slowly and continuously, maintaining the kalkwasser saturation at the ideal level. At lower flow rates, it prevents the formation of the heavy kalk slurry that is often seen with other brands. This thoughtful design significantly reduces the risk of overdosing. In contrast, many other kalkwasser reactors utilize a mixing pump to vigorously combine the kalkwasser at intervals, resulting in a highly concentrated slurry that must settle before it can be dosed. To mitigate this risk, those reactors often require a complex arrangement of timers to manage the pump's operation.