Features:· 6-level three-phase motor drive, large starting torque, stable operation; · Multi-pole permanent magnet rotor, large flow, low noise; · Single-chip computer control, with current, voltage abnormal protection, over temperature and Stall protection function; · Automatic speed control adaptive DC frequency conversion technology, high efficiency and energy saving; · Both fresh water and sea water are suitable for amphibious use. · The motor is completely sealed, no copper element is exposed; · Wear-resistant ceramic shaft and bushing are used, corrosion resistance and long service life. 

Porous material traps large and small dirt particles

PLATINIUM HEATER - innovative glass heaters from AQUAEL equipped with an electronic thermostat. They have temperature control from 20 to 33°C with an accuracy of +/- 0.4°C. This makes it possible to treat many fish diseases with the heater, including so-called "fish pox". They are equipped with an intuitive control system (ONE TOUCH system), a ceramic heat sink and a built-in electronic thermometer. The fully electronic thermostat ensures that the heater has no mechanical contacts or other moving parts prone to wear. This means they can work reliably for many years and ensure optimal thermal conditions in the aquarium. The PLATINIUM HEATER line includes 8 models with outputs from 25 to 500W, which allow precise adaptation to the size of the aquarium. The PLATINIUM heaters are among the most technically advanced aquarium water heaters available on the market. Heating aquarium water has never been so intuitive and safe. Features: Fully electronic - no fault-prone mechanical parts of the thermostat Built-in electronic thermometer - shows the current water temperature in the tank Electronic precision thermostat (+/- 0.4°C) The operation of the heating and the display of the current temperature are indicated by LEDs. Works in both freshwater and saltwater aquariums PLATINIUM heaters are manufactured according to the strictest European safety standards, which allows safe use and operation. Each unit is tested and calibrated in the AQUAEL laboratory, which guarantees accuracy and safety in use. Product More Details  The correct aquarium water temperature is crucial for the health of fish and other aquatic organisms. This is one of the basic criteria that influences the success of breeding and the durability of the aquarium ecosystem. Water temperature has a significant impact on various aspects of fish life, including their metabolism, disease resistance and overall well-being. Market recognition The Platinium Heater is one of the many products that have been in the Aquael range for years and continually receive positive feedback from both customers and aquarium professionals. Such features of the heater as its lasting reliability and precision in action are what have determined its enduring popularity among aquarists. We are proud to supply products that meet the expectations of our customers and contribute to a healthy and harmonious fish life in the aquaria around the world. Precision in action The Platinium Heater maintains the aquarium water temperature with an accuracy of 0.4 degrees. It has a fully electronic thermostat – without parts prone to failure as in the case of mechanical thermostats – which guarantees reliability and failure-free operation. The Platinium Heater ensures even heat distribution throughout the aquarium. Thanks to the ceramic heat sink, the heat is distributed evenly, eliminating areas with different temperatures in the tank. This not only ensures optimal conditions for fish and other aquatic organisms, but also minimises the risk of the formation of areas of extreme temperature that can create stress or danger for the aquarium inhabitants. Easy to use The One Touch System ensures intuitiveness and simplicity of operation of the heater. It allows the operating temperature to be changed at the touch of a button. LEDs indicate both the current temperature in the tank and the target temperature programmed by the user. Problem-free installation is made possible by a set of rubber suction cups. Versatility The heater is designed for freshwater and marine tanks. With a wide operating range of 77 to 91 °F (25 to 33 °C), the Platinium Heater is also ideal for treating fish diseases such as fish pox. It can easily be installed in any tank using the suction cups and the hanger included in the package. Occupational safety Platinium Heaters are manufactured in accordance with the most stringent European safety standards, ensuring safe operation and maintenance. Each device is tested and calibrated in the Aquael laboratory, what ensures precision and safety of work. 25W 50W 75W 100W 150W 200W 250W 300W 500W For aquariums up to (litres) 10-25 15 - 50 35-75 60-100 90-150 130-200 180-250 230-300 300-1000 Power (watts) 25th 50 75 100 150 200 250 300 500 Dimension depth (cm) 20.5 22.5 22.5 24.5 28.5 28.5 36 36 36 Temperature control Yes Yes Yes Yes Yes Yes Yes Yes Yes Accuracy (°C) 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Fully electronic Yes Yes Yes Yes Yes Yes Yes Yes Yes Thermometer function Yes Yes Yes Yes Yes Yes Yes Yes Yes  

EHEIM power supplyEnergy saving, certified safety power supply (180 Watts)To operate EHEIM powerLED+ lights (daylight, plants, hybrid, actinic blue) until 180 Watts.Capacity: max. 180 watt

KW Zone Aquadine Airstone Long Blister Card

The aquarium aerator Oxyboost Plus by Aquael is used to airify water in the aquarium. Especially the energy efficiency of this air pump is shown through the low power consumption. On average, only 2,2 to 2,5 watts are required, depending on the version. This makes the pumps excellent for continuous operation. The Oxyboost Plus is intended for closed aquariums. It stands on four rubber feet which cushions vibrations which results in a particular running smoothness. The membrane aerator can even be placed on the aquarium cover. All in all, the choice is between four power stages. The number in the name of the respective version indicates how much litres air can be pumped within an hour through the device. While the aerators 100 and 150 use one outlet, the versions 200 and 300 operate two. To adjust the flow rate, the variants 150 and 300 use a regulator. In addition to that, not only the slim black-and-white design convinces but also the easy way to clean. Key Features Silent Operation: Achieved through a thoughtfully engineered design and insulated casing. Modern Design: Features a sleek black-and-white appearance and a rounded disk-like shape, making it both stylish and easy to clean. High Productivity: Available in four models, each with varying levels of air output. European Manufacturing: Produced in the EU at Aquael’s factory in Suwałki, Poland, ensuring consistent quality and availability of parts. Model Specifications AP 100 PLUS Air Output: Up to 100 liters per hour Outlet: Single Power Consumption: 2.2 W APR 150 PLUS Air Output: Up to 150 liters per hour Outlet: Single Power Consumption: 2.2 W Performance Adjustment: Smooth adjustment via a dial AP 200 PLUS Air Output: Up to 200 liters per hour Outlets: Double Power Consumption: 2.5 W APR 300 PLUS Air Output: Up to 300 liters per hour Outlets: Double Power Consumption: 2.5 W Performance Adjustment: Smooth adjustment via a dial Applications Continuous Aeration: Ideal for maintaining optimal oxygen levels in aquariums. Sponge and Undergravel Filters: Efficiently drives these filters. Marine Aquariums: Suitable for driving simple tube skimmers. Ornamental Use: Enhances visual appeal when paired with AQUAEL AIR LIGHTS illuminated nozzles. Benefits Efficient Power Use: Operates at minimal power (2.2-2.5 W) while delivering high performance. Easy Maintenance: The rounded design simplifies cleaning. Reliable Production: Made in the EU, ensuring availability of replacement parts and high manufacturing standards.  

Impeller (50 Hz) for compact 300, miniFLAT, miniUP/ skim350/aquacorner60

Quick Vac pro cleaning extension with blade for aquarium glass panes

Features & Advantages Simulates natural sun & moon cycles Energy efficient & user friendly Carefully made and safe to use Increases the quality of life in aquariums A natural cycle of sun and moon light for your aquarium dwellers! This LED module frbyom AQUAEL emits more light than conventional fluorescent lamps but saves up to 50% energy and offers natural colour temperatures. The light simulates different sunlight and moonlight cycles: Sunny / Blue (dawn), Sunny (daylight) and Blue (moonlight) - ideal for aquarium plants as well as animals. Furthermore, the LEDs are long-lasting. A great option for those who want to offer their aquarium dwellers an improved quality of life without much effort or cost. The module consists of a contemporary LED unit, a glass housing for protection against moisture and a cable with switch. The system is splash-proof and can be operated without problems in close vicinity of an aquarium, for example, when attached to the cover above the tank. The LEDDY TUBE modules are very easy to install. Each model is supplied with special adapters so that they can be assembled into any luminaire. The modules draw power from an independent supply source. Four versions of the product are available: two for freshwater aquariums (LEDDY SUNNY, which emits light with a colour temperature of 8000 K similar to natural sunlight, and LEDDY PLANT with a colour temperature of 9000 K, designed to enhance the growth of aquatic plants) and two for marine aquariums (LEDDY MARINE, which emits light with a colour temperature of 10000 K, designed to improve corals growth and LEDDY ACTINIC – 20000 K - for better colours of corals). Technical data: Power - 10 W / Current voltage - 220 V-50Hz Length - 41.5 cm / Light temperature - 9000 K IP class- IPX 8 Product More Details  Thanks to the LED technology used, the power consumption is much lower than in traditional light sources, and the power consumption is only 14 W. This is half the value of T5 (39 W) and T8 (30 W) fluorescent lamps. The big advantages of Leddy Tube 2.0 are long life, does not heat up the water in the  aquarium and easy installation  in the aquarium covers. Modern LEDs vs. traditional fluorescent lamps, incandescent bulbs and compact fluorescent lamps Properly selected LEDs are the basic source of light in modern aquarism. They effectively displaced the previously used fluorescent lamps, incandescent bulbs and compact fluorescent lamps from the market. Compared to them, they have a number of advantages. They allow for a significant reduction in electricity consumption, because by producing the same amount of light as fluorescent lamps, they consume up to half as much. And this translates into both lower electricity bills beneficial for the aquarist’s pocket and environmental protection. They do not often have to be replaced with new ones, because they can work up to 15,000 hours, which again is associated with a large saving of money, environmental protection and less labor intensity. At the same time, they do not unnecessarily heat  the water in the aquarium, they shine directionally only towards the water surface (so you do not need to use additional reflectors), besides, unlike traditional fluorescent lamps, they have a two-year manufacturer’s warranty. Why do we illuminate the aquarium? There are usually two reasons. First of all, the tank is nice, that is, it looks natural. The light is to make the fish and plants have beautiful, appropriate colors for a given species, and the whole will be an unquestionable decoration of the room. The second goal is equally important – the vast majority of aquarists want to have healthy, well-growing plants in the aquarium. And plants need light to grow for 10-12 hours a day, which is the “drive” of photosynthesis – a natural process as a result of which they transform inorganic compounds into organic substances necessary for their life. Thus, properly selected light is to guarantee at the same time that the aquarium will look nice and the plants will grow well in it. The LEDs installed in the LEDDY TUBE SUNNY module emit light with a color temperature of 7000 K. This provides good conditions for aquarium plants and guarantees faithful color reproduction of all inhabitants of the aquarium. How much light in the aquarium? How much light does the aquarium require? It depends on what species of plants we are going to grow in it. In terms of light requirements, they can be divided into three groups: Group I – shade-bearing species, e.g. “pelia”, mosses, winged microzorium, screw diver, some compact (e.g. aponogetonolist, Wendt’s compact, Backett’s warbler, Malayan warbler), anubias. Group II – moderately photophilous species, e.g. spherical twig, water tintland, rhododendrons, tiger lotus, ludwigie, broad-leaved vodka, three-flowered vodka, monkfish, broad-leaved arrowhead, Argentine marsh, giant diver, compact, limnophils, small-leaved bacopa, Thai krina, ponikło, Japanese gloss, swordfish. Group III – definitely photophilous species, e.g. cabombs, “glossostigma”, hemiantus. Usually, the conversion of lighting power per liter of aquarium is used. It is conventionally assumed that in the case of LED lamps for growing shade plants, min. 0.15-0.2 W for each liter of water. Moderately demanding plants need 0.25-0.4 W / l, and those definitely photophilous even 0.5-0.7 W / l. The “day” in the aquarium can fall on virtually any part of the day. If the tank stands far from the windows and is illuminated only by artificial light, the hours of switching on and off the lighting can be practically any. It is best to simply adapt them to our preferences and the hours when we are usually present in the apartment (e.g. “dawn” at 3 PM and “dusk” at 1 AM). We can then enjoy the beauty of our own “piece of the underwater world” at will.  

Easy nocturnal CO2 supply switchoff In combination with a timer, the sera CO2 solenoid valve for auto switch precisely regulates CO2 switchoff during the night or at any other time. It is suitable for installation into present and new pH controlled CO2 fertilizing systems. A CO2 pressure reducing valve must be installed between the sera CO2 solenoid valve and the CO2 gas bottle.

The new EHEIM powerLED+ is the perfect lighting for your aquariumFrom the full spectrum of sunlight to white and / or actinic light – our new LED lamps cover the entire range. All spectrums are carefully balanced to support the growth of either plants or corals and to enhance the natural colours in the aquarium. The LED’s can be adjusted to fit any aquarium by extending the brackets to the correct length or existing fluorescent tubes can be replaced with our LED by inserting the specially designed adapter into the existing light unit. EHEIM quality – made in Germany.Advantages of the EHEIM powerLED+High-quality and efficient alternative to T5 fluorescent tubes (incl. reflector!)Full depth lighting - even in deep aquariums.LED strips can be combined to create the perfect balance for plant or coral growthFull sunlight spectrum with maximum output for photosynthesis (fresh water).Reproduces the natural colours in the aquariumAverage service life > 50.000 hoursHigh-quality, solid aluminium housing (anodised), marine water resistant8 lenghts available to fit aquariums from 36 – 135 cm long (lengths can be adjusted by extending the stainless steel support brackets).Suitable for use with existing fluorescent light tube units (T8, T5); existing tubes can be replaced by inserting the EHEIM T8-/T5 adapter (see accessories)Single and double wire suspension available for open aquariums (see accessories)Highly efficient safety power supply (24V) saves energySeveral lamps can be connected to one power supply unit with our Y adaptor (accessories)Can be used with LEDcontrolEHEIM powerLED+ fresh plantsFull spectrum sunlight (9.500 K) for photosynthesis (royal blue 445 nm and warm white with an enhanced red component)Encourages healthy growth in demanding plantsPerfect for Lake Malawi and Lake Tanganyika aquariumsEnhances the natural blue and red tones of fish and plantsMaximum energy efficiency and light output (93 lm/W)Can be used as a single light source or in combination with EHEIM powerLED+ fresh daylightFor aquariums up to approx.: 787-951mmLight colour: 10000Rated light flux: 2425Lifetime: 50.000 hoursManufacturer guarantee: 3 Year(s)Performance at 50 Hz: 24,8 WattEnergy Efficency Class: FSea water: NoFreshwater: YesArchive: NoPacking: 1 Part (s)

Intake pipe D.14/17mm smoke topaz

LEDDY SMART DAY&NIGHT is designed for tanks with a capacity of 2,6 to 13,2 US gal and a height not exceeding 13,8 inch. It uses modern LED technology hidden in a flat (only 0,4 inch thick), elegant lampshade. Installation of the lamp is very simple – just slide its arm directly onto the edge of the aquarium glass. It fits tanks made of glass up to 0,24 inch thick. The lamp is available in two versions – with a universal SUNNY spectrum and a specialized one, supporting rapid plant growth – PLANT spectrum. The LEDs emit light with a color temperature of 7000 K (SUNNY) or 9000 K (PLANT) and an efficiency comparable to a 14-watt traditional linear fluorescent lamp. This provides good conditions for aquarium plants and guarantees faithful color reproduction of all aquarium inhabitants. The use of a large number of LEDs with a total power of 4.8 watts in the lamp makes the tank evenly illuminated. LEDDY SMART DAY & NIGHT lamps are indispensable for lighting shrimp tanks and other small freshwater tanks. Their additional advantage is maintenance-free and longevity – the LEDs installed in them can work without replacement for up to 15 thousand hours. The light comes in white and black color variants. Try Leddy Smart Day & Night lighting to make your aquarium delightful at any time! Product More Details  An aquarium is not only a home for fish, shrimp and plants, but also a decoration of the room. Therefore, modern aquarium accessories must be both functional and elegant, harmonizing in style with the interior of modern rooms. The LEDDY SMART DAY & NIGHT aquarium light is a prime example of this. LEDDY SMART DAY & NIGHT combines elegance and minimalism of form with high utility values guaranteeing optimal conditions for the care of any freshwater nanoaquarium. The lamp has been enriched with the Day & Night function, thanks to which you can choose one of three light modes DAY / DAYBREAK / NIGHT depending on your needs. These are two different levels of daylight and a blue night light. DAY is the basic and strongest light, for illuminating the aquarium during the day. DAYBREAK is a reduced daylight power to 50% plus blue light. It works well as the first mode after night and when feeding fish – especially if you have a skittish stock. NIGHT is a blue glow that allows unique observation of the aquarium after dark, including fish and animals with nocturnal lifestyles. Day & Night lighting will beautifully highlight the arrangement in the aquarium both during the day and at night, and make the interior of the room where the tank is located more cozy. The DAY / DAYBREAK / NIGHT light modes can be changed manually or remotely via the Aquael app-controlled Socket Link Duo controller, which is also available from Aquael.

For operating the sera LED Tubes You can supply several LED Tubes with power when using the sera LED ballasts and the sera LED Triple Cable. You do not need a ballast for every tube but choose the one suitable for your purposes from the three ballasts. This ensures the capacity is optimally utilized and no unnecessary energy is consumed. Add the power consumption of the LED lighting and the choose the suitable ballast. Be aware that ballasts must not be overloaded when doing so. Recommendation: Max. consumption < 20 Wattagesera LED ballast 20 V DC 1 A Max. consumption < 60 Wattagesera LED ballast 20 V DC 3 A

This marine chiller is subject to ambient room temperature and other additional heat sources in the aquarium, such as lighting, filters, pumps, power heads and even pumps that are integrated into equipment, like protein skimmers and various types of reactors. These coolers are designed for tropical marine and freshwater aquarium systems. You will need a larger cooler than stated for native marines and specialised lower temperature freshwater set-ups. It uses the environmentally friendly refrigerant R134 A and has a pleasing, contemporary design. Features Over-current and overheat auto-protection system. Utilizes high-quality material. Suitable for use in both salt and freshwater. Built-in temperature memory.

Easy to install and easy to use. It is important to isolate pregnant fish, giving them peace to give birth separated from community tank fish. After birth, fish can be put back into community tank leaving baby fish to grow large enough in this Fish Net Breeder. Package Include: 1 x Aquarium Net Breeder1 x White Nylon Net4 x Suction Cups

The new EHEIM powerLED+ is the perfect lighting for your aquariumFrom the full spectrum of sunlight to white and / or actinic light – our new LED lamps cover the entire range. All spectrums are carefully balanced to support the growth of either plants or corals and to enhance the natural colours in the aquarium. The LED’s can be adjusted to fit any aquarium by extending the brackets to the correct length or existing fluorescent tubes can be replaced with our LED by inserting the specially designed adapter into the existing light unit. EHEIM quality – made in Germany.Advantages of the EHEIM powerLED+High-quality and efficient alternative to T5 fluorescent tubes (incl. reflector!)Full depth lighting - even in deep aquariums.LED strips can be combined to create the perfect balance for plant or coral growthFull sunlight spectrum with maximum output for photosynthesis (fresh water).Reproduces the natural colours in the aquariumAverage service life > 50.000 hoursHigh-quality, solid aluminium housing (anodised), marine water resistant8 lenghts available to fit aquariums from 36 – 135 cm long (lengths can be adjusted by extending the stainless steel support brackets).Suitable for use with existing fluorescent light tube units (T8, T5); existing tubes can be replaced by inserting the EHEIM T8-/T5 adapter (see accessories)Single and double wire suspension available for open aquariums (see accessories)Highly efficient safety power supply (24V) saves energySeveral lamps can be connected to one power supply unit with our Y adaptor (accessories)Can be used with LEDcontrolEHEIM powerLED+ fresh plantsFull spectrum sunlight (9.500 K) for photosynthesis (royal blue 445 nm and warm white with an enhanced red component)Encourages healthy growth in demanding plantsPerfect for Lake Malawi and Lake Tanganyika aquariumsEnhances the natural blue and red tones of fish and plantsMaximum energy efficiency and light output (93 lm/W)Can be used as a single light source or in combination with EHEIM powerLED+ fresh daylightFor aquariums up to approx.: 680-844mmLight colour: 10000Rated light flux: 1940Lifetime: 50.000 hoursManufacturer guarantee: 3 Year(s)Performance at 50 Hz: 19,9 WattEnergy Efficency Class: FSea water: NoFreshwater: Yes

Features & Advantages Aquarium size: 40-67 cm For open freshwater aquariums With 3 light modes The lamp contains two rows of diodes with a total power of 10 W (2×5 W) or 16 W (2×8 W). Half of them are SUNNY diodes emitting light similar to sunlight (color temperature 7000 K), and the other half are PLANT diodes developed especially for the needs of plants (color temperature 9000 K). The lamp perfectly reproduces the colors of the tank interior and supports fast, undisturbed plant growth. It is perfect for small plant aquariums and shrimp tanks. Its flat, futuristic shape and fashionable black color make it fit perfectly with modern aquarium tanks and look great in any interior. Moreover, it is universal – it can also be installed on tanks of non-standard sizes. The LEDDY SLIM DUO SUNNY PLANT&NIGHT LED lamp operates in three operating modes: DAY (SUNNY 100% power + PLANT 100% power), DAYBREAK (SUNNY 50% power + PLANT 50% power + NIGHT 100% power) and NIGHT (NIGHT 100% power) ). DAY is the basic and strongest light for illuminating the aquarium during the day. DAYBREAK works well as the first mode after night and when feeding fish – especially if you have a skittish stock. NIGHT is a blue glow that allows for a unique observation of the aquarium after dark, including fish and nocturnal animals. DAY & NIGHT lighting will beautifully highlight the arrangement in the aquarium both during the day and at night, and will also make the interior more cozy. The DAY / DAYBREAK / NIGHT operating mode is changed after turning the module off and on using the switch within no longer than 5 seconds. Switching directly to DAY mode takes place after turning off the module for a period longer than 5 seconds and turning it on again. It is best to automate this process by using the modern SOCKET DUO aquarium controller. Product More Details  Open aquariums and their lighting An open aquarium is a great option for people looking for modern and designer solutions in aquariums. It is preferred especially by enthusiasts of styles such as Dutch, Japanese or biotope aquariums. Thanks to its natural appearance, an open aquarium can become an attractive element of interior design and attract the attention of guests. It also ensures better air humidity in the room, which is especially beneficial for people suffering from respiratory diseases. Open aquariums are tanks without a lighting cover. In their case, lighting mounted on beams or hanging lamps is used. Lamps for mounting on the side edges or on the rear wall of the tank are also often used. The latter are dedicated to smaller capacity “nano” tanks. Why do we illuminate the aquarium? There are usually two reasons. First of all, the tank has to look nice, i.e. natural. The light is supposed to make fish and plants have beautiful colors appropriate for a given species, and the whole thing will be an undisputed decoration of the room. The second goal is equally important – the vast majority of aquarists want to have healthy, well-growing plants in their aquarium. And plants need light to grow for 10-12 hours a day, which is the “drive” for photosynthesis – a natural process as a result of which they transform inorganic compounds into organic substances necessary for their life. Therefore, correctly selected light will also guarantee that the aquarium will look nice and that the plants will grow well in it. How much light in the aquarium? How much light does an aquarium require? It depends on what species of plants we intend to grow there. In terms of light requirements, they can be divided into three groups: Group I – shade-tolerant species, e.g. “pelia”, mosses, winged microsorium, screw moss, some plants (e.g. Aponogetonofolia, Wendt’s assemblage, Backett’s assemblage, Malay assemblage), anubias. Group II – species that are moderately light-loving, e.g. ball-shaped seaweed, water-wort, roseworts, tiger lotus, ludwigia, broad-leafed water-wort, three-flowered water-wort, frogwort, broad-leafed dart, Argentine waterweed, giant common waterwort, compacts, limnophiles, small-leaved bacopa, Thai marmoset, ponikło , japanese blyksa, spearworts. Group III – species that are definitely photophilous, e.g. cabombas, “glossostigma”, hemianthus. Usually, the conversion of lighting power to the liter of the aquarium is used. It is conventionally assumed that in the case of LED lamps for growing shade-tolerant plants, it is necessary to have at least 0.15-0.2 W for each liter of water. Medium-demanding plants need 0.25-0.4 W/l, and those definitely light-loving even 0.5-0.7 W/l. A “day” in an aquarium can fall on virtually any part of the day. If the tank is located far from windows and is lit only by artificial light, the times the lighting can be turned on and off can be virtually any. It’s best to simply adjust them to our preferences and the hours when we are usually present in the apartment (e.g. “dawn” at 3 p.m. and “dusk” at 1 a.m.). Then, we can enjoy the beauty of our own “piece of the underwater world” in brightly lit places.

With EHEIM LEDcontrol+e you can easily control the brightness curve and the lighting mood in your aquarium - without cables.A lot depends on the light in your aquarium. Animals and plants react positively to the natural process of brightness and light colours.Our wireless LED controller offers you a variety of settings.Thanks to integrated plug connections, it is quickly installed. Programming is easy on a smartphone, tablet or PC. You do not need an app for this, you control the network of the controller directly. Now select the luminaire and one of the pre-installed lighting scenarios - done. Alternatively, you can enter your individual lighting scenario and set the duration of sunrise and sunset, select moonlight and clouds, etc. The current time is automatically synchronized. And when setting up a new aquarium, you can even use an acclimatisation function.Updates can be downloaded free of charge from the EHEIM website.Advantages of the wireless LED controller EHEIM LEDcontrol+eControl of the aquarium lighting - only in combination with EHEIM powerLED+ lights (from serial no. xxxx05)Integrated plug-in connectionsWireless operation via smartphone, tablet or PC/Mac via your own networkSimulation of the light variations and light moods as in naturePre-installed lighting scenarios for fresh and marine water including quick-start guideIndividually programmable lighting sequence and control of the colour channelsFreely configurable: sunrise, sunset (up to 3 hours each), cloud effects, moonlight etc Lighting scenarios can also be shared with other aquaristsExpert mode with additional setting optionsAcclimatisation mode when changing light source (T5/T8 to LED) or when setting up a new aquariumIdeal for the "fresh plants" and "marine hybrid" luminaires;here you can individually adjust the brightness curve as well as the light colours With the "fresh daylight" or "marine actinic" luminaires, you can only define the brightness curveFast forward to check the selected settingsEasy change from summer to winter time at the touch of a button Updates free of charge for download on the EHEIM website Highest safety and reliability - 3 years warrantyWidth:97 mmWiFi:YesHeight:97 mmDepth:28 mmSea water:YesFreshwater:YesPacking:1 Part (s)