Milk for both cats and dogs Alternative to dairy Hypoallergenic formula Bioline Pet Milk serves as a dairy alternative for nursing dogs and cats. This pet milk is hypoallergenic, promotes a rapid increase in probiotics, enhances immunity, supports digestion and nutrient absorption, and helps maintain a healthy intestinal system. Benefits -Dairy substitutes for canines and felines -Made with natural pet milk -Hypoallergenic -Volume: 220 ml Key Ingredients raw milk, whey protein concentrate, milk calcium, fish oil (1000mg/L), egg yolk powder Additives ẞ-galactosidase, taurine,  Vitamin E, Vitamin B₁ Vitamin B Guaranteed Analysis Nutrients    |   Value Crude Protein:   ≥ 3.6% Crude Fat:       ≥ 3.6% Moisture:        ≤88% Calcium:     ≥ 0.12% Taurine:     ≥ 0.02% Recommended Feeding Guidelines <2 weeks     :   60mL/day 2-4 weeks  :   60-110mL/day >4 weeks  :   110-220mL/day Pregnancy and lactation :  220mL/day Adulthood   :  220mL/day Senior age   :  220mL/day Storage Instructions Store in a cool, dry location, shielded from direct sunlight. Refrigerate the container after opening and use it as soon as possible. Shake well before serving. Precautions This product is intended exclusively for cats & dogs. Do not feed this product to ruminants. Please consume the product soon after opening. If the lid is bulging or shows any signs of damage, do not feed it. Ideal For dogs and cats at all life stages Treat your furry friend to the best in nutrition and flavor with our Premium Lactose Milk

A comprehensive testing solution for water quality in koi and garden ponds. Effectively tracks the 10 key water parameters in aquariums, providing simple and dependable results for ponds, well water, and tap water.Expires on 31 Jul 2025

Replacement test strips for smartphone-based analysis of freshwater aquariums. Key Features: • Smartphone-enabled water analysis and diagnostics: easily and safely monitor water parameters in freshwater aquariums. Measures general hardness, carbonate hardness, pH level, nitrite, nitrate, chlorine, and CO2 levels. • Innovative water analysis method: download the ProScan app for free, dip the test strip into aquarium water, place the strip on the color chart for evaluation, and scan the chart to obtain results. • Quick diagnosis - accurate results: test results are shown as numerical values and categorized (good/medium/poor). You'll receive additional guidance for maintaining optimal conditions in freshwater aquariums and ponds. • Compatible with iPhone and iPad: requires iOS 5.0 or newer, Android 4.0 or newer, and a camera with autofocus capability.Expires on 31 May 2027

Effortless and dependable assessment of ammonium (NH4) and ammonia (NH3) levels in aquariums and ponds. Monitors the biological equilibrium (bacterial activity) in both freshwater and saltwater environments. Utilizes a laboratory comparator system to adjust for the natural color of the water: fill glass vials with your sample, add reagents to one vial, position the vials in the holder, and read the results from the color chart and table. Recommended usage: during the initial setup of a new freshwater aquarium: once daily. For marine water setups: once weekly. Also suitable for monitoring during fish illnesses or fatalities. For comprehensive details and troubleshooting advice regarding water analysis, visit the JBL website under Essentials/Aquarium or Pond. Included in the package: 1 quick test for ammonium NH4, enabling approximately 50 tests. Comes with 3 reagents, 2 glass vials with screw caps, a syringe, a comparator block, and a color scale. Additional reagent refills are available separately.

The temperature of the water plays a crucial role in maintaining the well-being of your fish. The Fluval vertical mount digital thermometer offers precise temperature readings within the range of 18 to 30 degrees Celsius (64 to 86 degrees Fahrenheit).

The Dymax pH Meter provides precise pH measurements for your aquarium water, displaying results with an accuracy of up to two decimal places. Featuring a large LCD screen, you can quickly assess the acidity and alkalinity of your aquarium water with just a glance. Thanks to the included magnetic mounting clamp, the Dymax pH meter can be easily attached to the aquarium glass, making it simple to read. Key Features: Backlit LCD display Operates on battery (suitable for outdoor use) or AC adapter (ideal for indoor use) Accuracy to two decimal points Magnet for securing to glass up to 19mm thick Battery low indicator Sleek design, only 22mm thick Designed for 10 hours of outdoor operation Included in the package: pH Meter Power Adapter pH Probe Magnetic Clamp

The API® pH TEST KIT is designed to keep track of pH levels, ensuring your freshwater aquarium remains healthy. Monitoring pH is essential to avoid the detrimental effects that can arise from water being too alkaline or acidic, which can harm both fish and aquatic plants. Spend a few moments each week with this user-friendly kit to check and maintain your pH levels! This kit measures pH between 6.0 and 7.6, allowing you to swiftly assess whether your levels are within the appropriate range or if adjustments are needed. It comes with 250 tests, including one test bottle, straightforward instructions, a glass test tube, and a color chart for easy reference.Expires on 31 May 2029

Utilize the API® pH TEST STRIPS for a fast and precise method to assess the pH levels in your aquarium water. These strips can gauge a broad spectrum of pH, ranging from 6.0 to 9.0 ppm, ensuring a safe environment for your fish. The product includes a desiccant-lined tube with a secure snap-tight cap, an exceptionally accurate color chart for reliable water parameter readings, and guidance on how to rectify unsafe water conditions. Suitable for both freshwater and saltwater aquariums. Size: 25 pieces per box.Expires on 31 Jan 2026

To ensure the well-being of your freshwater fish and plants, it is essential that the general hardness (GH) and carbonate hardness (KH) of your aquarium water closely resemble their natural environment. The API® GH & KH TEST KIT is designed to help you recreate the ideal conditions for your fish, minimizing stress and promoting their health! This kit includes 2 testing bottles, clear instructions, and glass test tubes for your convenience.Expires on 30 Apr 2027

Facilitates easy monitoring of oxygen levels in freshwater Rapid breathing at the water's surface is a clear indication of low oxygen levels. Sadly, by this time, it might already be too late to take the necessary steps. The sera O2-Test checks the current oxygen concentration in your water within moments, enabling timely action. The sera O2 plus offers an immediate oxygen boost. Enough for approximately 60 tests. Usage Information www.sera.de/fileadmin/user_upload/manuals/sourcefiles/04914_sera_O2-Test_2015-06_INT.pdf

Helps you easily keep track of nitrate levels in both fresh and saltwater Nitrate (NO3) serves as a key indicator of significant organic pollution. It's crucial to address the source of this pollution, and performing a partial water change can offer immediate relief. Over time, using sera siporax Professional can help prevent nitrate build-up. Enough for approximately 60 measurements. Usage Information:  https://www.sera.de/fileadmin/user_upload/manuals/sourcefiles/42994_42995_42996_-INT-_sera-nitrat-test_05-2018.pdf

This product is designed to measure the magnesium concentration in a marine aquarium. Warning! Reagent 1 contains sodium hydroxide, which can cause severe burns. Ensure that the reagent is stored securely out of children's reach. Always wear protective gloves while handling. If it contacts your eyes, rinse immediately with water and seek medical attention. If you experience any nausea, consult a doctor and bring this manual with you. A proper magnesium concentration is essential for the health of marine invertebrates and algae, such as red calcareous algae, which utilize significant amounts of magnesium to form their skeletons. Natural seawater typically has a magnesium concentration of around 1300 mg/l. To maintain optimal conditions in your marine aquarium, this level must be achieved. The Sera magnesium test provides a quick and easy way to measure magnesium concentration in your aquarium. You can also easily increase magnesium levels using Sera magnesium plus. Boost magnesium levels with Sera Marin COMPONENT 6 magnesium. The amount of reagent used will depend on the calcium level in the water being tested. How to Use: Instructions for use Maintaining an optimal magnesium level in a marine aquarium is crucial for the well-being of invertebrates and decorative algae. For instance, red calcareous algae require a substantial amount of magnesium for their skeletal structure. The natural concentration in marine water is approximately 1,300 mg/l, which should also be replicated in your aquarium. The Sera magnesium test enables you to quickly and easily check the magnesium levels. If you have prior testing experience with the Sera calcium test, this process will be even simpler. You can effortlessly enhance the magnesium levels in your marine aquarium by adding Sera Marin COMPONENT 6 magnesium. Usage Instructions: Shake the reagent bottles thoroughly before use! Avoid contact between the tested water and the aquarium or pond water!  1. Rinse the measurement vial several times with the water you wish to test, then discard the water. Dry the outside of the vial.  2. Rinse the syringe multiple times with the water to be tested, then draw 2 ml into the syringe and transfer it into the vial. 3. Add 6 drops of reagent 1 and shake the vial until the mixture is uniform. Any cloudiness that appears will not impact the results. 4. Introduce one level scoop (included in the kit) of reagent 2 into the vial and gently swirl (do not shake) until the powder is fully dissolved. 5. Gradually add reagent 3 drop by drop, counting each drop. Release pressure on the reagent bottle after every 5 drops to allow air to enter. Shake the vial after each drop until the color shifts from pink to blue (not violet) and remains stable for at least 30 seconds while gently swirling the vial. Record the number of drops used. 6. Discard the contents of the measurement vial, rinse it thoroughly with tap water, and then rinse it several times with the water to be tested before emptying it again. Dry the outside of the vial. 7. Use the syringe to take up 2 ml of the water to be tested and transfer it into the vial.  8. Add 6 drops of reagent 4 and shake the vial until the liquid is evenly mixed. Any cloudiness that occurs will not affect the test.  9. Introduce one level scoop (included in the kit) of reagent 5 into the vial and gently swirl (do not shake) until the powder is fully dissolved. 10. Add reagent 3 drop by drop, counting each drop. Release pressure on the reagent bottle after every 5 drops to allow air to enter. Shake the vial after each drop until the color changes from red to green and remains stable for at least 30 seconds while occasionally swirling the vial. Note – you will require significantly more drops for this measurement than for the initial one! 11. To determine the magnesium level, subtract the number of drops used in the first measurement from the total used in the second measurement. Multiply the remaining number of drops by 60 to convert it to mg/l. For example, if the first measurement needed 4 drops and the second needed 24, subtracting gives you 20 drops. Multiplying 20 drops by 60 results in 1,200 mg/l magnesium. 12. Cleaning: Rinse the vial and syringe thoroughly with tap water before and after each test. Immediately close the reagent bottles after use and do not swap caps. Store them at room temperature and away from light. This product is intended for testing ornamental fish aquariums and pond water only. Keep in a cool, dark place!

Boyu Magnetic Cleaner With Thermometer [WD-Series] The Boyu WD-Series Magnetic Scraper is expertly crafted to effortlessly clean aquarium glass (up to 12 mm) without causing any scratches. It features a built-in digital thermometer, allowing you to monitor the temperature throughout the aquarium. When the inner part is detached from the exterior, it floats, making it simple to retrieve from the tank. Available sizes: S : 10.4x4.3x6.2cm M : 11.4x4.7x6.8cm L : 12.85x5.3x7.4cm

Effortless and Fast Monitoring Regular checks or safety assessments: The sera Quick Test offers the perfect solution to swiftly and easily measure key water parameters (pH level, carbonate hardness, total hardness, nitrate, nitrite, and chlorine) in your aquarium using just one test strip. Simply dip a test strip into your tank for a second, then wait for 1 minute and compare the color intensity to the chart provided on the packaging. This straightforward method is ideal for beginners aiming to achieve the best water quality in their aquariums. If the results indicate any discrepancies from the ideal levels, the sera liquid tests enable precise identification of the differences. Usage Information https://www.sera.de/fileadmin/user_upload/manuals/sourcefiles/04960_sera_Quick-Test_2015-06_INT.pdf https://www.sera.de/fileadmin/user_upload/manuals/sourcefiles/4001942049603_45227_-INT-_sera-quick-test-6in1.pdf

Boyu Magnetic Cleaner With Thermometer [WD-Series] The Boyu WD-Series Magnetic Scraper is expertly crafted to clean aquarium glass (up to 12 mm thick) without causing any damage. It features a built-in digital thermometer that allows you to monitor the temperature throughout your aquarium effortlessly. When detached from the outer section, the submerged part floats, making it simple to retrieve from the tank. Available Sizes: S : 10.4x4.3x6.2cm M : 11.4x4.7x6.8cm L : 12.85x5.3x7.4cm

Wireless design featuring a built-in probe for effortless operation. Compact and petite, its design is exceptionally elegant. Perfect for both freshwater and saltwater aquariums. Fully sealed to prevent any leaks. Imported from India. Wireless design featuring a built-in probe for effortless operation, Compact and petite, its design is exceptionally elegant, Perfect for both freshwater and saltwater aquariums. Fully sealed to prevent any leaks.

Boyu Magnetic Cleaner With Thermometer [WD-Series] The Boyu WD-Series Magnetic Scraper is expertly crafted to clean aquarium glass (up to 12 mm) without causing any scratches. This innovative tool features a digital thermometer that allows you to monitor the temperature throughout your aquarium effortlessly. When the inner part is detached from the outer part, it conveniently floats, making it simple to retrieve from the water. Available sizes: S : 10.4x4.3x6.2cm M : 11.4x4.7x6.8cm L : 12.85x5.3x7.4cm

Simplifies the tracking of carbonate hardness in both freshwater and saltwaterFor around 390°dKH. If KH levels are too low, we suggest using sera KH/pH-plus (for freshwater) or sera pond bio balance (for ponds). Conversely, if the values are too high, we recommend filtering with sera super peat (in freshwater aquariums).